Connection Figure - Yamaha EM-300 Owner's Manual

CONNECTION FIGURE
FUSE:
Use 7A, 250V fuses. If it is
necessary to replace a blown
fuse, disconnect the AC plug
from the power socket and then
replace with a unit having the
same ratings. If the fuse should
blow during operation, it means
that there is a failure and that
you should get in touch with
your dealer
For holdback
Microphone
POWER SW:
This is the power switch which
accommodates reversed polari¬
ties with two ON positions that
help ta minimize hum in certain
instances.
USA & CANADIAN MODELS
A0112T (Self-Power Monitor)
0 MON OUT 1,
MON OUT 2
O INPUT
Connect this to the AC
power outlet
SPEAKERS
r~r~ r~ r~ 7T~ ( ( ( r- -r~
MM
mi
iSS
■
') U
U U U
© LINE OUT
GENERAL MODEL
Tape deck (recording)
Main speaker (L)
Delay unit (echo unit)
Tape deck (playback)
Main speaker
(R)