Advertisement
Available languages
Available languages
◊ checking the completeness and reliability of fixing parts;
◊ external examination (serviceability of the power cord, its protective tube
and plug), the integrity of the insulating parts of the body and handle, the
presence of protective covers and their serviceability;
◊ checking switch`s work;
◊ idle check.
Beware of electric shock.
Prevent body contact with grounded surfaces and objects (pipes, radiators,
refrigerators, etc.).
machine is allowed to carry out work without the use of personal protective
equipment against electric shock.
Do not allow the presence of unauthorized persons.
Keep children and unauthorized persons out of the working area. Do not hand
over the machine to people, who aren`t authorized to use it.
Upon completion of work:
Store the machine in a dry, enclosed area away from children.
Keep mode of operation.
Do not overload the machine, follow the recommended mode of operation
for it.
Do not exceed the maximum permissible operating time specified in the
instruction manual (if any).
Do not operate the machine if any of the following malfunctions occur
during operation:
◊ damage of the plug connection, power cord or its protective tube;
◊ fuzzy operation of the switch;
◊ sparking brushes on the collector, accompanied by the appearance of
a circular fire on its surface;
◊ the appearance of smoke or smell characteristic of burning
insulation;
◊ the appearance of a knock;
◊ breakage or cracks in the body part, handle, protective cover;
◊ damage to the replacement working tool.
Use the machine for its intended purpose.
Do not use the machine for purposes which were not intended. Use the
recommended replacement tool.
Wear suitable clothers.
Wear clothers that prevents it from being caught by moving parts of the machine.
Do not wear jewelry. When working outdoors, it is recommended to wear rubber
gloves and non-slip shoes. Long hair must be covered with a bandage.
USE PROTECTIVE DEVICES.
Wear protective glasses. Wear a protective mask while working. In case
of high dust content, use a filter mask. Use noise protaction equipment
if necessary.
Do not subject the power cord to mechanical stress.
The power cord of the machine must be protected from accidental damage
(e.g. by hanging it). Direct contact of the cord with hot and oily surfaces
is not allowed.
IT IS FORBIDDEN:
◊ leave unattended the machine connected to the electrical network;
◊ carry the machine by the cord;
◊ pull the plug out of the socket by the cord;
◊ pull and twist the power cord, subject it to stress (for example, put
a load on it).
Securely fasten processed materials and objects.
To secure materials and objects, use clamping devices or a vice. This ensures
safe operation and freedom of hands.
Maintain a stable position while working. Always ensure good footing
and balance while working.
Keep your machine in order.
Keep the machine clean and in good working order. Handle the machine
with care, do not expose it to impacts, overloads, dirt, oil products.
Lubricate the machine and replace parts in accordance with the instruction
manual. Periodically inspect the power cord, if damaged, have it repaired by
an appropriate specialized company. Periodically inspect extension cords
and replace if damaged.Відключати машину від мережі.
Disconnect the machine from the network.
The machine must be switched off by a switch in case of a sudden stop
(due to a power failure in the network, jamming of moving parts, etc.).
The machine should be disconnected from the mains with a plug when
changing the working tool, when installing attachments and adjusting,
when moving from one workplace to another, during breaks in work, before
maintenance, at the end of work.
Remove setting tool.
Develop the habit before turning on the machine to check whether the
setting tool (screwdrivers, wrenches) is removed from the working area.
Prevent unintentional activation.
Avoid accidentally pressing the switch. When turning on a machine, make
sure that the switch is not turned on.
Apply for outdoor work.
For outdoor use, use an extension cord whuch is designed and marked for
outdoor usage.
Be extremely careful while working.
Monitor the operation in progress. Do not turn on the machine when you
are tired.
Use in production conditions.
When using the machine in production conditions, in addition to the
specified safety requirements, it is necessary to follow the safety rules in
force at the enterprise and developed in accordance with the requirements
of labor safety standards in relation to manual electric machines.
The machine must only be repaired by a specialized company.
RO|ROMÂNĂ
AGITATOR ELECTRIC
PMM2000, PMM2100, PMM2200
INSTRUCȚIUNI DE OPERARE
Specificații tehnice
Type
PMM2000
Tensiune
nominală, V
Frecvență, Hz
Putere
850
nominală, W
Viteză, rpm
350-950
Vibrație ah,
m/s
2
Eroare K, m/s
2
Nivelul de
presiune al
sunetului Lpa,
dB(A)
Eroare Kpa,
dB(A)
Nivelul de putere
al sunetului Lwa,
dB(A)
Eroare Kwa,
dB(A)
Protection class
Protection
category
RO | ROMÂNĂ
8
Model name
PMM2100
PMM2200
220-240
50
1200
1400
350-750/
400-950
400-800
3,157
1,5
92
1,5
103
1,5
II
IPX0
Advertisement
