Preparation - Philips 32PW9588 Manual

Preparation

&
Place the TV on a solid surface.
! 32PW9588: 60 kg !
For ventilation, leave at least 5 cm free all
around the TV. Do not place the TV on a
carpet.To prevent any unsafe situations, do not
place any objects on top of the TV. Avoid heat,
direct sunlight and exposure to rain or water.
é
Insert the aerial plug firmly into the aerial
socket x at the back of the TV. For best
picture quality use the suppressor-aerial cable
supplied.
"
Remote control
supplied (Type R6-1,5V).
The batteries supplied do not contain the heavy
metals mercury and cadmium. Please check on how
to dispose of exhausted batteries according to local
regulations.
2 2
m in .
1 m
: Insert the 2 batteries
75 75 75
ANTENNA ANTENNA ANTENNA
FM RADIO FM RADIO FM RADIO
'
Insert the mains plug of the TV in the wall
socket having a mains voltage of 220V-240V.
(
Switch the TV on
on the front of your TV.
A blue indicator on the front of the TV lights
up, the screen comes on and the LCD display
smoothly and automatically pops up. If the
indicator is red, press the
remote control.
§
:When popped up, the LCD
LCD display
display will show the mode the TV is in (TV or
Radio) together with information about the
selected mode.
When the TV is switched off to standby the
display will go down again.When the TV is
switched off with the power switch the display
will remain in the position it was. If needed, you
can manually push the display down.
Note:
- to switch off the automatic display movement, see
Setup, General menu, Auto LCD movement, p. 9.
- you can change the position of the display, up or
down, with the LCD key on the remote control.
See use of the remote control, p. 4.
More details about the content of the display,
see p. 3.
FM Wire Antenna connection
Connect the supplied FM wire antenna to the
FM RADIO ANTENNA 75
back of the TV. Adjust the position of the FM
antenna for the best reception.
Note: for better FM stereo reception, connect an
outdoor FM antenna or cable antenna to the
RADIO ANTENNA 75
75 ø coaxial wire.
: Press the power switch A
keys on the
-P+
ø connector at the
ø connector using a
FM