Table of Contents
Advertisement
Source
Source
Setup
This menu allows you to indicate the peripheral
you connected to one of the external inputs.
&
Press the cursor right to enter the list of types
of peripherals attached to the selected input.
é
Select the peripheral device with the cursor
up/down.
Once you have selected the source type, e.g. DVD,
this source will automatically be selected when
your remote control is in DVD mode, see p. 4, and
when you press the v key on the remote
control.
Decoder
Setup
If a decoder or a descrambler is connected, see
p. 20, you can define one or more programme
numbers as decoder programme numbers.
Demo
TV
Setup
Auto demo
Demo
......
Install
Dealer demo - Digital options
10
EXT1
EXT2
EXT3
EXT4
SIDE
Centre input
Centre in volume
Decoder
Programme
Status
- Light sensor
- Comb filter
Centre input - Centre in volume
When you have connected a surround receiver
to the TV, see p. 21, the loudspeakers of the TV
will act as centre speaker, making a separate
centre speaker unnecessary.
Select
Centre input On
Select
in case you have connected an
On
external audio receiver without Cinema Link.
Select
Cinema Link
connected a Cinema Link surround receiver.
When having selected
Centre in volume
correct volume level differences of the external
audio receiver and speakers.
&
Select
Decoder
é
Select
Programme
"
Select the programme number under which
you have stored the programme coming from
your decoder.
'
Select
.
Status
• Select the input used to connect your decoder:
,
or
None
EXT1
• Select
if you do not want the selected
None
programme number being activated as a
decoder programme number.
Note: Select
EXT2
to your EasyLink video recorder.
The Demo menu allows to demonstrate the TV
features separately or in a continuous loop.
If
has been selected the demo will
Auto demo
automatically present the features sequentially in a
loop. Press one of the cursor keys to stop the
Auto demo.
If one of the features has been selected, this
particular feature demo will run only once, and the
Demo menu will reappear.
Note: The Dealer demo is not part of the automatic
sequence and can only be activated separately.
or
Cinema Link
in case you have
you can adjust the
On
with the cursor left/right to
with the cursor right.
.
.
EXT2
when the decoder is connected
.
Advertisement
Table of Contents
