Hisense Hi Move III Manual page 32

To remove the dust bin, push the button in the middle of the inner side of the handle to the left. The filter can be
removed from the top side, while the filter container can be removed by pressing on the button on the rear bottom
part of the dust bin. When replacing the dust bin onto the motor unit, make sure all parts are correctly assembled
and installed. Make sure the two plugs on the dust bin's front part are aligned with the grooves on the motor unit.
The dust bin is correctly placed once you hear a click.
The dust bin, the filter, and the filter frame are washable; however, male sure these parts are completely dry before
reassembling them. Flawless operation can only be ensured if the parts are dry; failure to dry the parts could lead
to problems resulting from incorrect use. Drying the parts in direct sunlight is not recommended.
Clean the filter carefully to prevent tearing it. If the filter is damaged, it must be replaced; otherwise, the debris you
are vacuuming may damage the motor unit.
Cleaning the brush
Press the small button on the rear part of the brush to remove the roller. Use scissors or some other blade to carefully
cut along the groove in the roller to remove any fabric or hair entangled on the roller. Do not pull on the entangled
threads, as this may damage the bristles on the roller. Replace the roller by correctly inserting the side of the roller
into the groove and fasten it. The roller is correctly in place when it latches in and the outer part sits firmly inside the
brush.
Product name:
Appliance nominal voltage:
Appliance nominal power:
Adapter voltage:
To empty the dust bin, pull the lever on the right-hand side of the motor unit
handle. The bottom part of the cover will open. Rotate the inner part of the
large filter to the left to remove it. Correctly replace the dust bin and rotate it
in the opposite direction. Then, close the cover. The dust bin is correctly
placed once you hear a click.
Vacuum cleaner
25,2 V / 2000 mA / lithium-ion batteries
400W
32 V: 450 mA
32