Appliance Parts; Appliance Assembly - Hisense Hi Move III Manual

For easier transport, some appliance parts are packed separately and safely placed in the main packaging unit.
Before first use, read and observe the instructions for assembly and safe use.
Due to its design, the appliance is not free-standing. Therefore, we recommend safe placement on the charging
station. The appliance is intended for household use, for dry vacuum cleaning.

APPLIANCE PARTS

1 Housing with motor unit,
battery, and dust bin
4 2 in 1 motorized brush
7 Bedding attachment

APPLIANCE ASSEMBLY

Assemble the tubes and connect the upper part to the motor unit and the lower part to the floor brush. The appliance
is correctly assembled with the appliance is firmly attached all the way to the grooves.
Also supplied with the appliance is the charging station onto which two smaller attachments may be placed for
storage. The charging station should be placed at least 1 m away from any heat-radiating body. Due to its design,
the appliance is not free-standing.
USE OF THE VACUUM CLEANER
Tubes can be adjusted as desired, and the brush fits on any tube, as well directly onto the motor unit. Vacuuming
attachments also fit on both the vacuuming tube and the motor unit. Press the button on the brush or the tube to
change the attachment as required.
Floor brush: use it to vacuum any type of flooring (vacuum cleaning dry flooring).
2
Suction tube
5
Narrow nozzle
8 Wall holder with adapter and
power cord
29
3
Flexible hose
6 Dust attachment
9 3 screws