Table of Contents
Advertisement
5-2-3. P4 Area
1) Insert Connector Assy 10P to HT3
2) Attach Sheet Core, C (X1) to main bracket as shown.
LVDS
Dress Lead Assy Earth & Conn
Assy 10P together. Attach
Sheet Core, C (x1)
Lead Assy Earth conn
2
Conn Assy 10P
Conn Assy
5-2-4. P5 Area
1) Install AC cord holder to AC power cord at the position shown
2) Insert AC power cord to GT3 PWB
3) Install AC cord holder into the under cover
4) Dress AC power cord using pin wire , A6101
5) Keep the distance >4mm away from the surrounding parts.
Insert Ac Power
Cord
2
Make sure distance of .4mm is kept from
F6102 and C6111 lead to single insulated
portion of AC power cord (Blue and Brown
5
Keep
wire). This can be controlled by using pin, wire
>4mm
A6101 to dress AC power cord away from
4
Dress AC power
cord using pin wire
Do not dress
Spk Conn Assy
4P in this area
Spk Conn
BT2
Assy 4P
Do not over pull the
Conn Assy 10P
1
HT3
conductive parts.
3
Clamp AC Cord Holder to AC
Power Cord at this position
1) Insert Spk Conn Assy 4P to speaker
Attach LCD, Tape to Spk Conn Assy 4P
on the speaker.
Note: Do not tape on the speaker hole
Do not tape on the
– 17 –
KLV-22, 32 T550A
Left speaker
Insert Spk Conn Assy 4P
to speaker.
1
Attach LCD, Tape.
speaker hole
RM-GA016
Advertisement
Table of Contents
