Table of Contents
Advertisement
Specifications
Model name
KLV-32T550A
System
Panel System
LCD (Liquid Crystal Display) Panel
TV System
B/G, I, D/K, M
Colour System
PAL, PAL60, SECAM, NTSC4.43, NTSC3.58
Channel Coverage
B/G: VHF: E2 to E12/ UHF: E21 to E69/ CATV: S01 to S03, S1 to S41
I:
UHF: B21 to B69/ CATV: S01 to S03, S1 to S41
D/K: VHF: C1 to C12, R1 to R12/ UHF: C13 to C57, R21 to R60/ CATV: S01 to S03, S1 to S41,
Z1 to Z39
M: VHF: A2 to A13/ UHF: A14 to A79/ CATV: A-8 to A-2, A to W+4, W+6 to W+84
Sound Output
Input/Output jacks
Antenna
75 ohm external terminal
1
Video input (phono jack)
1
Audio input (phono jacks): 500 mVrms, Impedance: 47 kilohms
Supported formats: 1080p (50/60 Hz), 1080i (50/60 Hz), 720p (50/60 Hz), 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3V sync negative/P
Audio input (phono jacks): 500 mVrms, Impedance: 47 kilohms
Video output (phono jack)
Audio output (phono jacks)
HDMI IN 1, 2
Video: 1080p (50/60 Hz), 1080i (50/60 Hz), 720p (50/60 Hz), 576p, 576i, 480p, 480i
PC IN
(RGB)
PC Input (D-sub 15-pin) (see page 20)
G: 0.7 Vp-p, 75 ohms, non Sync on Green/B: 0.7 Vp-p, 75 ohms/
R: 0.7 Vp-p, 75 ohms/HD: 1-5 Vp-p/VD: 1-5 Vp-p
PC IN
PC audio input (minijack)
Power and others
Power Requirements
110–240 V AC, 50/60 Hz
Screen Size (inches)
Display Resolution
1,366 pixels (horizontal) × 768 lines (vertical)
Power Consumption
Indicated on the rear of the TV.
Dimensions
with stand (mm)
920 × 569 × 221
(w × h × d)*
without stand (mm)
920 × 527 × 105
Mass*
with stand (kg)
without stand (kg)
Optional
Wall-Mount
SU-WL500 or SU-WL50B
Accessories
bracket
* Dimensions and mass are approximate values.
Design and specifications are subject to change without notice.
Instructions on "Installing the Wall-Mount Bracket" are
not supplied in the form of a separate leaflet with this TV.
These installation instructions are included within this
TV's instructions manual.
Printed in Thailand
KLV-22T550A
10 W + 10 W
5 W + 5 W
/C
: 0.7 Vp-p, 75 ohms/P
/C
: 0.7 Vp-p, 75 ohms
B
B
R
R
32
22
655 × 407 × 159
655 × 372 × 90
12.4
6.7
11.6
6.3
SU-WL100
KLV-32T550A
KLV-22T550A
© 2009 Sony Corporation
LCD Colour TV
Operating Instructions
4-153-893-E1(1)
Advertisement
Table of Contents
Related Manuals for Sony BRAVIA KLV-32T550A
Summary of Contents for Sony BRAVIA KLV-32T550A
-
Page 1: Specifications
* Dimensions and mass are approximate values. Design and specifications are subject to change without notice. Instructions on “Installing the Wall-Mount Bracket” are not supplied in the form of a separate leaflet with this TV. These installation instructions are included within this TV’s instructions manual. -
Page 2: Trademark Information
Introduction Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference. The illustrations used in this manual are of the KLV-32T550A unless otherwise stated. Trademark information • HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. -
Page 3: Table Of Contents
Set-up menu ... 19 PC Settings menu... 20 Channel Set-up menu... 21 Eco menu ... 23 Before operating the TV, please read “Safety information” (page 7). Retain this manual for future reference. Additional Information Installing the Accessories (Wall-Mount Bracket) ...24 TV installation dimensions table... -
Page 4: Start-Up Guide
To insert batteries into the remote Push and lift the cover to open. 1: Attaching the stand • This TV is very heavy, so two or more people should place the TV onto the stand. • If using an electric screwdriver, set the tightening torque at approximately 1.5N·m (15kgf·cm). -
Page 5: 3: Preventing The Tv From Toppling Over
Tie the wood screw and the machine screw with a strong cord. z • An optional Sony support belt kit is used to secure the TV. Contact your nearest Sony service centre to purchase a kit. Have your TV model name ready for reference. -
Page 6: Watching Tv
“Display this menu next time?” dialogue, then press to exit. z • If “Yes” is selected and the TV is turned off by pressing 1 on the TV, or is disconnected from the AC power outlet, the initial set-up procedure restarts the next time the TV is turned on. -
Page 7: Safety Information
Handle the AC power cord and outlet as follows in order to avoid any risk of fire, electrical shock or damage and/or injuries: – Use only Sony supplied AC power cords, not those of other brands. – Insert the plug fully into the AC power outlet. -
Page 8: Precautions
Turn off the TV set and unplug the AC power cord immediately if any of the following problems occur. Ask your dealer or Sony service centre to have it checked by qualified service personnel. When: – AC power cord is damaged. -
Page 9: Overview Of The Remote
% – Mute Press to mute the sound. Press again to restore the sound. z • In standby mode, if you want to turn on the TV without sound, press this button. qg / – Text In Text mode: Displays Text broadcast. -
Page 10: Using The Tools Menu
For TV, Video, Component or HDMI (except PC input) Wide Zoom* Enlarges the centre portion of the picture. The left and right edges of the picture are stretched to fill the 16:9 screen. Normal Displays the 4:3 picture in its original size. -
Page 11: Overview Of The Tv Buttons And Indicators
8 "/1 – Power indicator / Standby indicator • Lights up in green when the TV is turned on. • Flashes while the remote is being operated. • Lights up in red when the TV is in standby mode. ) or... -
Page 12: Using Optional Equipment
Using Optional Equipment Connecting optional equipment You can connect a wide range of optional equipment to your TV. For service use only S VHS/Hi8/DVC camcorder Video game equipment DVD player without component video output DVD player with component video output... -
Page 13: Viewing Pictures From The Connected Equipment
• The HDMI jacks only support the following video inputs: 480i, 480p, 576i, 576p, 720p (50/60 Hz), 1080i (50/60 Hz) and 1080p (50/60 Hz). • Be sure to use only an HDMI cable that bears the HDMI logo (recommended Sony HDMI cable). -
Page 14: Viewing Twin Picture
Viewing Twin Picture You can view two pictures (external input and TV programme) on the screen simultaneously. Connect the optional equipment (page 12), and make sure that images from the equipment appear on the screen (page 13). Press Two pictures are displayed simultaneously. -
Page 15: Using Menu Functions
FM Radio Settings Listening to the FM Radio You are able to listen to the FM radio stations using your TV by connecting an antenna (page 4). FM Radio tuning range is from 87.5-108.0 MHz. Do this Access to FM Radio mode Press MENU and select “FM Radio”. -
Page 16: Using The Favourite List
Do this Listen to non-preset stations 1 Access to FM Radio mode. 2 Press F/f to automatically search for the desired FM radio station. • If the station has a noisy sound, you may be able to improve the sound quality by pressing G/g. •... -
Page 17: Settings Adjustment
Settings adjustment You are able to change the settings of your TV from “Settings” menu. Press MENU. Press F/f to select “Settings”, then press Press F/f to select a menu icon, then press Press F/f/G/g to select an option or adjust a setting, then press •... -
Page 18: Sound Menu
NICAM bilingual NICAM monaural A2 (German) stereo A2 (German) bilingual z • If you select other equipment connected to the TV, set “Dual Sound” to “Stereo”, “Main” Screen menu Wide Mode For details about wide mode, see page 10. Auto Wide Automatically changes the wide mode according to the input signal from an external equipment. -
Page 19: Set-Up Menu
Sets the TV to automatically switch to standby mode after a certain amount of time. z • If you turn off the TV and turn it on again, “Sleep Timer” is reset to “Off”. • A notification message appears on the screen one minute before the TV switches to standby mode. -
Page 20: Pc Settings Menu
• For the best picture quality, it is recommended to use the signals in the above chart with a 60 Hz vertical frequency (boldfaced). In plug and play, signals with a 60 Hz vertical frequency will be selected automatically. • Be sure not to turn the TV off during this period (it takes about 30 seconds) or press any buttons. -
Page 21: Channel Set-Up Menu
Repeat the procedure above to set other favourite channels. Auto Tuning Tunes in all the available channels. This option allows you to retune the TV after moving house, or to search for new channels that have been launched by broadcasters. - Page 22 Selects the colour system (“Auto”, “PAL”, “SECAM”, “NTSC3.58”, “NTSC4.43” or “PAL60”) according to the channel. Signal Booster (Intelligent Signal Booster) Improves the picture quality if the TV signal is too strong or weak. Press lines; signal interference) or “Auto” if the signal is weak (snowy picture), then press Signal Level Displays the signal level for programme currently being watched.
-
Page 23: Eco Menu
Selects the power saving mode to reduce the power consumption of the TV. Choose either “Standard Power” or “Reduced Power”. Idle TV Standby Selects the time (“1h”, “2h” or “3h”) to set the TV into standby mode automatically, if you do not operate the TV for the specified period of time. -
Page 24: Additional Information
Sufficient expertise is required for installing these products, especially to determine the strength of the wall for withstanding the TV’s weight. Be sure to entrust the attachment of these products to the wall to Sony dealers or licensed contractors and pay adequate attention to safety during the installation. Sony is not liable for any damage or injury caused by mishandling or improper installation. -
Page 25: Tv Installation Dimensions Table
Figures in the above table may differ slightly depending on the installation. WARNING The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of the TV. Refer to “Specifications” for its weight. -
Page 26: Screw And Hook Locations Diagram/Table
Screw and Hook locations diagram/table Screw location - When installing the Mounting Hook on the TV. SU-WL500: Hook location - When installing the TV onto the Base Bracket. SU-WL500: * Hook location “a” and “b” cannot be used for the models in the table below. -
Page 27: Troubleshooting
No picture (screen is dark) and no sound • Check the antenna/cable connection. • Connect the TV to the AC power outlet, and press 1 on the TV. • If the 1 (standby) indicator lights up in red, press "/1.