Table of Contents
Advertisement
ENGLISH
meters and the letter "т" will be displayed beside the dis-
tance number in the Finder and LCD.
To switch to "feet", press in the Autofocus Button, hold it
there and turn the Selecting Dial from OFF to "ISO". The
"Ft" Sign will be displayed for five seconds in the LCD, but
not in the Finder.
To reset the distance unit to "m", repeat the above-
mentioned procedure. The LCD will show "m" for five
seconds to tell you that the resetting operation has been
completed.
2. Switching off the buzzer (Fig. 58)
* Buzzer on (Fig. 58-A)
* Buzzer off (Fig. 58-B)
If you feel the buzzer sound worrisome, you can switch it
off.
An electronic "beep" which sounds when the shutter
tripped, or a repeated "beep, beep, beep, . . . . ." which
tells you that the film has reached the last frame can be
switched off.
While pressing in the Self-timer Button, turn the Selecting
Dial from OFF to "ISO". The "OFF" Sign will be displayed
in the LCD for five seconds and the buzzer will turn off.
To reset it to "ОМ", repeat the same procedure. The LCD
will show "ON" for five seconds to tell you that the buzzer
has been switched on again.
3. Total shots indicator (Fig. 59)
Use it as a guide for regular maintenance.
JSING THE SELF-TIMER
|. Set the self-timer mode (Fig. 55)
[o set the self-timer mode, press in the Self-timer Button
49) to bring out the Self-timer Sign ( ©) ( in the LCD.
2. Start the self-timer (Fig. 56)
Го start it, press down the Shutter Release. The Self-timer
Lamp will turn on and the Self-timer will start. The Lamp
will glow for seven seconds, then blink for three seconds,
after which the shutter will trip to take your picture.
+ After shooting with the Self-timer, the self-timer mode
will be switched off. To take a picture with the Self-timer
again, press in the Self-timer Button a second time.
ж In the self-timer mode, the camera's autofocus and auto
exposure system will operate when the Shutter Re-
lease is depressed. Depending on the subject condi-
tions, use manual focusing and manual exposure for
compensating for autofocus, intensifying or reducing
the subject contrast, etc.
IV. EXTRA FUNCTIONS
1. Switchover of the distance unit (Fig. 57)
* Distance unit in meters (Fig. 57-A)
* Distance unit in feet (Fig. 57-B)
The distance unit can be switched from meters to feet, or
vice versa.
Your camera is Factory-set to display the distances in
Advertisement
Table of Contents
