Manual Installation; Give Name; Favourite Programmes - Philips 32PW8807 Handbook

Manual installation

This menu is used to store the programmes
one at a time or to add a programme to the
existing list.
From the
Installation
and Ê at the same time) :
& Select
Manual installation
the up/down cursor to select and the left/right
one to adjust :
INSTALLATION
Menu language
Country
Automatic installation
B Manual installation
B System

Give name

Reshuffle

Favourite programmes

SETUP
é
(only available in certain
Selection mode
countries) : permits selection of search mode
by or by
Frequency
"
select
System : Western Europe
Give name
This menu allows you to change or give a
name to the programmes and external
connectors. From the
(to select press ¢ and Ê at the same time) :
& Select
Give name
é Select the programme with the up/down
cursor and validate with
" Use the left/right cursor to move around the
Favourite Programmes
This menu allows you to select the
programmes to be accessed with the
key. From the
Installation
press ¢ and Ê at the same time) :
& Select
Favourite Programmes
The list of favourite programmes is displayed.
The programmes that were stored at
installation will automatically appear on this list.
Setup Menu: see page 13
menu (to select press ¢
u
and press
Manual installation
(Selection mode)
Programme no.
Search
Fine tune
Store
.
Channel
(BG
menu
Installation
u
and press .
u
.
@
menu (to select
and press
standard),
Great Britain
standard).
'
Programme number :
number using only the left/right keys.
(
. Use
Search :
programme is found, the scanning stops and
the name of the programme is displayed
(when available). Go to the next step. If you
know the frequency of the required
programme, this can be entered directly using
0
Æ
the
If no picture is found, see Tips (p. 14). See also :
EasyLink Function page 8.
§
Fine Tune :
the left/right cursor.
è
Store :
! Repeat steps ' to è for each programme to
store.
ç To exit, press
name display area (5 characters).
' Use the up/down cursor to select the
characters.
( Press
The programme name is stored.
§ Repeat steps é to ( for all programmes or
connectors to be named.
è To exit, press
é Use the up/downcursor to select the required
#
P
programme.
" Use the left/right cursor to add or remove a
programme from the list.
u
.
' Run through steps é and " for each
programme to be added or removed from the
list.
( To exit, press
Eastern Europe
(I standard) or
enter the required
u
press .The search starts. Once a
9
to keys.
if reception is poor, adjust using
u
press .The programme is stored.
H
several times.
u
when the name has been entered.
H
several times.
H
several times.
(DK standard),
(LL'
France
5