System Connections; Connecting Fm Antenna - Sony STR-AV320 Operating Instructions Manual

Connections
System Connections
Before connection, be sure to set the POWER switch to OFF.
FM antenna
AM antenna
_)
Turntable system
Speaker system
to a walt outlet Right Lett
Receiver
RP
CD player
LINE IN
LINE OUT to a wail outlet
LINE OUT
®DODDO®D:
® ® @'® ¢
Tape deck
AC OUTLET
to a wall outlet
Notes on system connection
« The red jacks of the receiver are for right-channel (R) connections
and the white jacks for left-channel (L).
« The cable connectors should be fully inserted into the jacks
A loose connection may cause hum and noise.
Connecting FM Antenna
For normal use For higher quality sound
Supplied wired antenna
| \ vt Ar |
|
|
| 75-ohm coaxial cable
(optional)
ae
Connecting AM Antenna
Supplied joop antenna
Adjust the direction
Notes on power source connection
The plug of the AC power cord can only be inserted into a
polarized AC outlet.
« Do not connect an electrical home appliance such as an electric
iron, fan, TV, or other high-wattage equipment exceeding 100
watts in total power consumption to the AC OUTLET on the
receiver.
Connecting Antenna Ground
To prevent hum, connect the ground wire to ANTENNA
ground terminal (}. When an outdoor antenna is
installed, be sure to connect the ground wire for
lightning protection.
a Speakers
Left Speaker
|
Speaker impedance and power capability
Use only the speakers having nominal impedance from 8 to
16 ohms, and rated at 50 watts (STR-AV320) or 40 watts
(STR-AV220) minimum RMS per channel with an 8-ohm load
from 40-20,000 Hz.