Pioneer VSX-9700S Operating Instructions Manual page 46

TROUBLESHOOTING
TV source can't be seen when
the VCR's TV tuner is used.
Video tape copies can't be made
with the VCR.
Remote control does not work.
46
<ARB1234>
e TV antenna is not connected to VCR, or
connections are faulty.
© You are attempting to watch a TV source using
a VCR with copy system connections.
In general, when copy system connections are
made, the VCR's TV tuner function ceases to
operate. For details, consult the operating
instructions for your VCR.
© Video tape copy connections haven't been made.
© Batteries are dead or no batteries in remote control
unit.
© Poor angle or too great a distance from the remote
sensor window.
© There is an obstacle between you and the remote
sensor window.
e LEARN selector switch and/or TRANSMIT mode
selector switch position is incorrect.
¢ A fluorescent light is shining on the remote sensor
window.
* Consult the VCR's operating instructions, and
connect antenna correctly.
© Disconnect the copy system connection.
¢ Look again closely at the section VIDEO SYSTEM
CONNECTIONS on page 9 and 35, and connect
correctly.
¢ Insert new batteries.
¢ Use within seven meters and within a 30 degree
angle of the remote sensor window.
¢ Change your position or move the obstacle.
© Set to correct position.
© Move so fluorescent light does not shine directly on
amplifier front panel remote sensor window.