Securing The Tv; Getting Started - Sony TRINITRON KV-FA21M63 Service Manual

C

Securing the TV

To prevent the TV from falling, use the supplied screws, clamps and band to
secure the TV. Use only the supplied screws. Use of other screws may damage the TV.
screws
Screw the band to the TV stand and
to the provided hole at the rear of
your TV.
D

Getting Started

Insert the batteries (supplied) into the remote.
Connect the antenna cable (not supplied) to 8
(antenna input) at the rear of the TV.
Plug in the power cord, then press 1 on the TV to turn it on.
Initial Setup
Set up the TV by following the instructions of the "Initial
Language: English
Setup" menu (see E).
Select Confirm End
20 mm
3.8 mm
or
Step 1
• Do not use old or different types of batteries together.
Step 2
• You can also connect your TV to other optional components
(see G).
Step 3
• The 1 (standby) indicator flashes green for a few seconds when
turning on the TV. This does not indicate a malfunction.
Step 4
clamps band
(1) Put a cord or chain through the
clamps.
(2) Screw one clamp to a wall or
pillar and the other clamp to the
provided hole at the rear of your TV.