Manually Update The Channel List - Philips 32PFL7674H Manual

3
Press:
• The Navigation buttons or Numeric
buttons to manually enter the
channel frequency.
Navigation buttons to select
• The
[Search next], then press OK to
automatically search for the next
channel.
4
When the correct channel frequency is
selected, press the Navigation buttons to
select [Done].
5
Press OK.
[Analogue: Manual installation]
The
»
menu appears.
6
Press the Navigation buttons to select
[Store current channel] to store the new
channel under the current channel; or
[Store as new channel] to store the new
channel under a new channel number.
7
Press OK to confirm your choice.
The channel is stored.
»
Fine-tune analogue channels
You can fine tune analog channels manually
when reception is poor.
1
When watching TV, select the channel to
fine-tune.
2
Press (Home).
The home menu appears.
»
3
Press the Navigation buttons to select
[Setup].
4
Press OK.
[Setup] menu appears.
The
»
5
Press the Navigation buttons to select
[Installation] > [Channel installation] >
[Analogue: Manual installation] > [Fine
tune].
6
Press OK.
[Fine tune] menu appears.
» The
EN
38
7
Press the Navigation buttons or Numeric
buttons to manually enter the channel
frequency.
8
When the correct channel frequency is
selected, press the Navigation buttons to
select [Done], then press OK.
The [Analogue: Manual installation]
»
menu appears.
9
Press the Navigation buttons to select
[Store current channel] to store the new
channel under the current channel.
10
Press OK to confirm your choice.
Manually update the channel
list
If your TV is in standby mode, an update is
performed every morning. This update matches
channels stored in your channel list with those
available from your broadcaster.
In addition to this automatic update, you can

manually update the channel list.

Tip
•
To disable the automatic update, in the
[Installation] menu, press the Navigation
buttons to select [Channel installation] >
[Channel update in standby], then select
[Off].
1
In the [Installation] menu, press the
Navigation buttons to select [Channel
installation] > [Automatic installation].
2
Press OK.
» A message appears with
selected, prompting you to start the
channel update.
3
Press OK.
The channel update screen appears.
»
4
Press the Navigation buttons to select
[Update channels].
[Start]