Philips 32PFL7674H Manual page 19

Settings assistant
Smart settings
Picture
Contr Contr ontr
S S Sound Br Brigh Brightness
Featu Featu eatures res Colour
Installation Hue
Software update Sharpness
Noise
Tint
6
Press the Navigation buttons and OK to
select and adjust a picture setting.
7
BACK to exit.
Press
The following picture settings can be
configured. Depending on the format of the
picture source, some picture settings are not
available.
[Settings assistant]Use settings assistant
•
to guide you through the best picture and
sound settings.
[Contrast]Adjusts the intensity of bright
•
areas, keeping dark areas unchanged.
[Brightness]Adjusts the intensity and
•
details of dark areas.
[Colour]Adjusts colour saturation.
•
• [Hue]Compensates colour variations in
NTSC encoded transmissions.
[Sharpness]Adjusts the level of sharpness
•
in image details.
[Noise reduction]Filters and reduces
•
noise in an image.
[Tint]Adjusts the colour balance in an
•
image.
Note
•
Before you adjust
> [Custom], then press OK to enable the
option.
[Custom tint]Make a customised tint
•
setting.
• [Pixel Plus HD]/[Pixel Precise HD]Gives
access to advanced picture settings:
EN
18
t ast
tness nes
r r
ne ne
redu u ct ction ction
[Custom tint], select [Tint]
[Perfect Natural Motion]Reduces
•
field and line flicker to display
movement smoothly.
[100Hz Clear LCD]Sets the TV
•
refresh rate to a maximum of
100Hz to provide superior motion
sharpness, better black level, high
contrast with a flicker-free, quiet
image and a larger viewing angle.
• [Advanced sharpness]Enables
superior sharpness, especially on
lines and contours in the picture.
[Dynamic contrast]Automatically
•
enhances contrast in an image.
• [Dynamic backlight]Adjusts the
brightness of the TV backlight to
match lighting conditions.
[MPEG artefact reduction]Smoothes
•
out transitions on digital pictures.
You can switch this feature on or off.
[Colour enhancement]Makes
•
colours more vivid and improves the
resolution of details in bright colours.
You can switch this feature on or off.
[PC mode]Enables picture settings
•
adjustment when a PC is connected to
the TV via HDMI. If enabled, you can
select [Picture format] > [Unscaled]
which provides maximum detail for
display of PC content.
[Light sensor]Dynamically adjusts picture
•
settings to match lighting conditions.
[Picture format]Changes the picture
•
format.
[Auto format mode]Sets the picture
•
format to automatically fill or
automatically zoom into the screen.
Tip
•
[Auto format mode] is disabled, select
If
[Picture format] > [Auto format] to enable
the option.
[Picture shift]Adjusts the position of the
•
picture.