JVC LX-D700U Instruction Manual page 8

8 (600vcd °N)
@ Video Images
When the input signal is NTSC
The display wilt switch each
time the Resize button of the
temote control is pressed. The outer periphery of the
image will become dark.
The outer periphery of the
image will become dark.
When the input signal is PAL or SECAM
pep
The display will switch each
time the Resize button of the
remote control is pressed.
The outer periphery of the
image will become dark.
Connecting to a personal computer
Always turn off the projector and personal computer power before connecting.
@ Video signal
IBM PC or compatible (DOS/V)
Use the accessory personal computer connecting cable provided.
Accessory personal computer
connecting cable
ej < rl
HD D-sub 15-pin
(male) Or else
use a conversion
adapter.
CAUTION
When connecting to a computer display monitor, use the
connecting cable equipped with ferrite cores to reduce and
remove the high-frequency radiation.
HD D-sub 15-pin HD D-sub 15-pin =
({maie) (male)
Macintosh
Use the accessory MA13, MA16 or MA19 conversion adapter, whichever is applicable, and the accessory personal
computer connecting cable.
Accessory conversion adapter
7
'cesee eee eee
D-sub 15-pin HD D-sub 15-pin ©
(male) (mate)
e
r
i
%,
CAUTION
When connecting to a computer display monitor, use the
connecting cable equipped with ferrite cores to reduce and
remove the high-frequency radiation.
@)
3/3/N002a |