Table of Contents
Advertisement
Chapter 1: Preparing the Emulator
Step 4. Install emulation memory modules on emulator probe
3 Install emulation memory modules on the emulator probe. There is a cutout at one end of the memory
modules so they can only be installed the correct way.
To install a memory module:
1 Align the groove in the memory module with the alignment rib in the connector.
2 Align the cutout in the memory module with the projection in the connector.
3 Place the memory module into the connector groove at an angle.
4 Firmly press the memory module into the connector and make sure it is completely seated.
5 Rotate the memory module to the vertical position so that the pegs on the connector fit into the
holes on the memory module.
6 Make sure the release tabs at each end of the connector snap around the memory module to
hold it in place.
26
Advertisement
Table of Contents
