Alpine Ai-NET CHA-1214 Service Manual page 53

| DW SERIES
@ Disc Unloading
a
The rotation of the motor is transmitted to gears (A), (B), (C), and (D).
The rotation of the gear (D) moves the slider cam (A) in X direction and the slider cam
(B) in Y direction, and the drive unit moves along to the edges of the cams, thereby
releasing the disc clamp.
The loading motor rotates
The rotation of the motor is transmitted to gears (E), (F), (G), and (H). Figure 12
The rotation of gear (H) is transmitted to the arm push-pull through the lever cam and
this moves the arm push-pull in X direction, thereby housing the tray into the magazine.
7 In the same way as in step (6), the rotation of the gear (H) moves the slider lock
through the lever slider lock and releases the lock of the chassis tray.
In the same way as in step (7), the rotation of the gear (H) turns on the switch (B)
through the arm switch. (Confirmation of the tray housed in the magazine.)
@ DIsc7>A
ew ¥P (A), (B). (C), (D) EMNMRETS.
¥P (D) OBAIC LW, AZADLA—-+-AL (A) PXAM, AFL H—+ AL (B) "
3 VARMICHE, ALOAFOT 1 -WICBoTK ITF +> Apy hePAMICHEDISCT
FVUTFERRTS.
4 A-F41-7-E-42-HPOKRTS.
¥P (E), (F). (G). (H) Chea nRets, 12]
| ¥P (H) OBA EWLN-- DLEPL, P-Lh- Fy vas FWEXAMMC
Fav7g
BOL, KUT EVAVVICMMATS,
ABS cielo. ¥7 (H) OMSBHAIC LH. LN-- AZGIH-—-OvZTEPL,
RI(HA-—-OvyI7tGHOL, Yr-Y->bLIODy 7TERBRTS,
AB 7 cine. ¥P (HW) OMA S). P-L AT YF EBL. AT VF
(B) PONTS. (RUT PVAYVICMMS NEC EDR)
=17=