Alpine Ai-NET CHA-1214 Service Manual page 41

4. Slide cam (F1), slide cam (F2) disassembly and
assembly methods
(1) Remove 2 screws @ and 1 spring (B). (Refer to
Figure 3.)
(2) Remove 3 washers (B) and remove slide cam (F1)
and slide cam (F2) in this order. (Refer to Figure 3.)
< Assembly notes >
@ When mounting the slide cams, make sure studs (A)
are securely fixed onto 3 slots.
@ When mounting the spring (B), make sure it is
securely hooked.
@ Do not use the washers used once when
assembling.
@ When mounting washer, take care the washer is not
deformed or damaged.
©xX15
Chassis frame assembly
| DW SERIES
4, RIT EAL (Fit) SAFI FAL (F2) O4>hF -
Maw AK
(1)2KADRAVOLIROZTULYT (B) FHALETF,
(388)
(2)38OTDy Y+— (B) E4%4L, ADL FAA (F1)
SAITEAL (F2) OWCMVALETF,
(SEIBR)
<#ELOFTR>
@ AF KALBA HE. SHPO MICSTUD (A)
ZbKALATTUSBERBUTR AU
@ ATUL? (B) RAW, HB COUR SEB
LTF Av,
@ —HRIRULEDy y+ —lt, PAYCRRIC SER Le
SFSU
@ Dy Yr Mitt, ORE. OC NOG VRE
BULTFSALY
Slide, Cam (F1)
Washer (B)
< Figure 3>
<3B4>