Table of Contents
Advertisement
Chapter 4 Try Out Some Handy Functions
™@ Recording a Performance
The RA-30 has a Recorder function that makes it possible for you to store your Style Play
and Tone Play performances. This works just like recording with a tape recorder, and
makes it easy to record your performances on the RA-30.
Unlike a tape recorder, however, the Recorder function offers special features that you
can't get from a tape recorder. For instance, you can increase the tempo without raising
the pitch, and you can listen to a recorded performance over and over with no loss in
sound quality.
*
The RA-30 can record only one song. When you make a new recording, any previously record-
ed song is discarded.
A song recorded on the RA-30 is preserved in memory even while the poter is off.
Any song that has been recorded will be discarded if you restore the unit to its factory defaults.
(p.45)
@ Recording Style Play
Tone
SaniGrass CroantFhie Stings Gaxtar/Base Synte
Mem
eeae
Music Style
Pop
Rock Conemporaty Seng
|
yn
oo'
a
Ho)
GE
core
. Press the Arranger button for One Touch and choose a Music Style (p.24).
You can choose a Tone (p.21) or change the tenrpo (p.27) to however you like, but be sure to do
these operations only after you've selected a Music Style.
If you wish to record a performance with no intro added, press the Intro/Ending button to make
the button's light go out.
. Press the Rec button for Recorder.
The light for the Rec button starts to flash, indicating the RA-30 is ready for recording.
Pressing the Rec button again makes the button light go out and cancels this state.
. Recording starts simultaneously when you finger the keyboard or press the
Start/Stop button.
The Rec button light also remains lit.
Approximately 5000 notes worth of music can be recorded.
. To finish recording, press the Intro/Ending button or the Start/Stop button to end
the performance.
. To play back what you've recorded, press the Play button.
The Play button light comes on during playback.
If the button's light doesn't come on when you press the Play button. it means that nothing is
stored in the recorder. If you want to try the recording over again, be sure to start at step 1.
. If you want to stop playback of a recorded performance, press the Start/Stop button.
If you want to do recording over again, be sure to start at step 1.
37
Advertisement
Table of Contents
