Chapter 1-1 Getting Ready For Connection To An Electronic Piano Gia; Connecting Headphones - Roland RA30 Owner's Manual

Chapter 1-1 Getting Ready for Connection to an Electronic Piano Gia
emma
ee SI TI
I I I ET TE a
SETTER TTS ET I
EE EET
@ Connecting Headphones
You can use the headphones for practice at night, or at other times when you don't want
to use the speakers.
* If the electronic piano has no INPUT jack, then you can't listen to the RA-30 and electronic
piano at the same time through the headphones.
* The Phones jack on the RA-30 is a standard stereo phone jack. If you wish to use headphones
with a stereo-mini plug, you will need to use an adaptor to convert it to the 1/4" phone type.
© If the Electronic Piano Has an INPUT Jack...
Plug the headphones into the PHONES jack on the electronic piano.
or Portable Stereo...
Plug the headphones into the PHONES jack on the HP-G.
m@ Before You Switch on the Power...
Before you switch on the power to the electronic piano and the RA-30, make the follow-
ing settings.
@ Lower the Volume
Use the Volume knobs (or Volume slider) to reduce the volume on the electronic piano
and the RA-30. This helps prevent damage to the speakers or other areas. After switching
on the power, adjust the volume to the appropriate level.
@ Setting the Local ON/OFF Switch
If you're using an electronic piano that has a Local ON/OFF switch on the rear panel, set
this switch to "OFF."
@ If You're Using a Roland HP-G Series Instrument...
Set the COMPUTER switch on the rear panel of the HP-G series instrument to "MIDI."
COMPUTER
MIDI PC-1
COMPUTER INTERNAL
/O PC-2 Mac
10