Related Manuals for SHOWTEC EventLITE 4/8 Mini Q4 V1
Summary of Contents for SHOWTEC EventLITE 4/8 Mini Q4 V1
- Page 1 USER MANUAL ENGLISH EventLITE 4/8 Mini Q4 Product code: 44080 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
- Page 2 EventLITE 4/8 Mini Q4 Preface Thank you for purchasing this Showtec product. The purpose of this user manual is to provide instructions for the correct and safe use of this product. Keep the user manual for future reference as it is an integral part of the product. The user manual shall be stored at an easily accessible location.
-
Page 3: Table Of Contents
EventLITE 4/8 Mini Q4 Table of contents Introduction ................................4 Before Using the Product ..........................4 Intended Use ............................... 4 Product Lifespan ..............................4 LEDs Lifespan ............................... 4 Text Conventions ..............................5 Symbols and Signal Words ..........................5 Symbols on the Information Label ........................5 Safety .................................. - Page 4 EventLITE 4/8 Mini Q4 Maintenance ..............................28 Safety Instructions for Maintenance ......................28 Preventive Maintenance ..........................28 Basic Cleaning Instructions ........................28 Draining Condensation Water ......................29 Corrective Maintenance ..........................29 Deinstallation, Transportation and Storage ....................30 Instructions for Deinstallation ..........................30 Instructions for Transportation ........................30 Storage ................................30 10.
-
Page 5: Introduction
After unpacking, check the contents of the box. If any parts are missing or damaged, contact your Highlite International dealer. Your shipment includes: ● Showtec EventLITE 4/8 Mini Q4 ● AC Power Adapter (1,1 m) ● IR Remote control ●... -
Page 6: Text Conventions
EventLITE 4/8 Mini Q4 Text Conventions Throughout the user manual the following text conventions are used: ● Buttons: All buttons are in bold lettering, for example “Press the UP/DOWN buttons” ● References: References to chapters and parts of the device are in bold lettering, for example: “Refer to 2. -
Page 7: Safety
EventLITE 4/8 Mini Q4 Safety Important Read and follow the instructions in this user manual before installing, operating or servicing this product. The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual. Warnings and Safety Instructions DANGER Danger for children For adult use only. - Page 8 EventLITE 4/8 Mini Q4 WARNING Risk of epileptic shock Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe lights. CAUTION Possible eye damage caused by high light intensity Possibly hazardous optical radiation emitted from this device. Do not look at the operating light source.
-
Page 9: Requirements For The User
EventLITE 4/8 Mini Q4 This device is designed to be used as a professional outdoor spot. Any incorrect use may lead to hazardous situations and result in injuries and material damage. ● This device is not suitable for households and for general lighting. ●... -
Page 10: Description Of The Device
Description of the Device The Showtec EventLITE 4/8 Mini is a battery-powered RGBW spot in a sturdy, IP65-rated aluminium housing. The battery will last up to 11 hours on a single colour when it is fully charged. The EventLITE 4/8 includes several presets and sound-activated programs, and can be controlled through the display and buttons on the back or by the included IR-remote controller. -
Page 11: Back View
EventLITE 4/8 Mini Q4 Back View Fig. 03 DC connector, 12 V DC LCD display + control buttons ON / OFF button 08) Protective valve Product code: 44080... -
Page 12: Product Specifications
EventLITE 4/8 Mini Q4 Product Specifications Model: EventLITE 4/8 Mini Q4 AC power adapter: Input voltage: 100–240 V AC, 50/60 Hz Input current: 0,6 A Output voltage: 12 V DC Output current: 1,4 A Physical: Dimensions: 149 x 103 x 138 mm (L x W x H) Weight: 1 kg Optics:... -
Page 13: Dimensions
EventLITE 4/8 Mini Q4 Dimensions Fig. 04 Product code: 44080... -
Page 14: Installation
EventLITE 4/8 Mini Q4 Installation Safety Instructions for Installation WARNING Incorrect installation can cause serious injuries and damage of property. If trussing systems are used, installation must be carried out only by instructed or skilled persons. Follow all applicable European, national and local safety regulations concerning rigging and trussing. Personal Protective Equipment During installation and rigging wear personal protective equipment in compliance with the national and site-specific regulations. -
Page 15: Rigging
EventLITE 4/8 Mini Q4 Rigging The device can be positioned on a flat surface (see Fig. 06) or mounted to a truss or other rigging structure in any orientation. Make sure that all loads are within the pre-determined limits of the supporting structure. -
Page 16: Angle Adjustment
EventLITE 4/8 Mini Q4 Angle Adjustment You can adjust the angle of the device with the 2 adjustment screws (02). Turn the adjustment screws (02) counterclockwise to release it. 02) Tilt the device at the desired angle (see Fig. 06). 03) Turn the adjustment screws (02) clockwise to tighten it. -
Page 17: Setup
EventLITE 4/8 Mini Q4 Setup Warnings and Precautions DANGER Electric shock caused by short-circuit This device is IP65 rated. ● Do not expose the device to conditions that exceed the rated IP class conditions. ● Keep the connector sealed with the rubber cap when the connector is not in use. Stand-alone Setup The EventLITE 4/8 Mini Q4 functions as a stand-alone device. -
Page 18: Operation
EventLITE 4/8 Mini Q4 Operation Safety Instructions for Operation Attention This device must be used only for the purposes it is designed for. This device is intended for professional use as an outdoor spot. It is not suitable for households and for general lighting. -
Page 19: Control Panel
EventLITE 4/8 Mini Q4 Control Panel A) LCD display MODE button C) SET button D) UP button DOWN button Fig. 07 ● Use the MODE button to exit the current submenu and to return to the Main Menu. ● Use the UP/DOWN buttons to navigate through the menus or to increase/decrease numeric values. ●... -
Page 20: Menu Overview
EventLITE 4/8 Mini Q4 Menu Overview Product code: 44080... -
Page 21: Main Menu Options
EventLITE 4/8 Mini Q4 Main Menu Options Upon start-up, the display shows the current software version. The main menu has the following options: Auto program mode Built-in programs Static color control Sound-controlled mode Settings Info ● Press the MODE or UP/DOWN buttons to navigate through the main menu. ●... -
Page 22: Programs 02-16
EventLITE 4/8 Mini Q4 Programs 02–16 01) If you select one of the programs 02–16, press the SET button to select one of the 2 options: ● SPEED ● STROBE 02) If you select SPEED, press the UP/DOWN buttons to set the built-in program’s speed. The adjustment range is 01–100, from slow to fast. -
Page 23: Settings
EventLITE 4/8 Mini Q4 Settings In this menu you can restore the default factory settings. 01) While in the main menu, press the MODE button to select 02) Press the SET button to enter the menu. 03) The display shows the following option: 04) Press the SET button to reset the device. -
Page 24: Remote Control
EventLITE 4/8 Mini Q4 Remote Control The device can be controlled with the included IR remote control. DANGER Do not ingest battery, chemical burn hazard The remote control contains a coin cell battery. If the coin cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. - Page 25 EventLITE 4/8 Mini Q4 To operate the device with the IR remote control, point the remote control to the infrared sensor (04). Note: The remote control will work only if the device is already operating in Auto, Built-in Programs, Sound or Manual mode.
-
Page 26: Auto Mode
EventLITE 4/8 Mini Q4 Button Function Description Activates Red LEDs Green Activates Green LEDs Blue Activates Blue LEDs Amber Activates a mixed color to mimic Amber LEDs White Activates White LEDs Cyan Activates cyan color Purple Activates purple color Purple/pink Activates purple/pink color Orange Activates orange color... -
Page 27: Program Speed
EventLITE 4/8 Mini Q4 Program Speed Press the button to set the program speed. Press the buttons to increase/decrease the program speed. The adjustment range is 1– 100, from slow to fast. Note: If you select program 1 and start adjusting the program speed, the device automatically switches to program 2. -
Page 28: Troubleshooting
EventLITE 4/8 Mini Q4 Troubleshooting This troubleshooting guide contains solutions to problems which can be carried out by an ordinary person. The device does not contain user-serviceable parts. Unauthorized modifications to the device will render the warranty void. Such modifications may result in injuries and material damage. - Page 29 EventLITE 4/8 Mini Q4 Maintenance Safety Instructions for Maintenance DANGER Electric shock caused by dangerous voltage inside Disconnect power supply before servicing or cleaning. Preventive Maintenance Attention Before each use, examine the device visually for any defects. Make sure that: ●...
- Page 30 EventLITE 4/8 Mini Q4 Draining Condensation Water The EventLITE 4/8 Mini Q4 is IP65 rated. The device can resist water jets. If the device is exposed to extreme humid conditions during servicing, condensation may collect inside the device. This can happen also during transportation, if the device is exposed to extreme temperature variations.
- Page 31 EventLITE 4/8 Mini Q4 Deinstallation, Transportation and Storage Instructions for Deinstallation WARNING Incorrect deinstallation can cause serious injuries and damage of property. ● Let the device cool down before dismounting. ● Disconnect power supply before deinstallation. ● Always observe the national and site-specific regulations during deinstallation and derigging of the device.
- Page 32 ©2023 Showtec...
Need help?
Do you have a question about the EventLITE 4/8 Mini Q4 V1 and is the answer not in the manual?
Questions and answers