Side Discharge; Adjusting The Height Of Cut - Toro eTimeCutter eMR4275 Operator's Manual

Side Discharge

The hinged grass deflector disperses clippings to the side and down toward the turf.
Without the grass deflector, discharge cover, or complete grass catcher assembly
mounted in place, you and bystanders are exposed to blade contact and thrown
debris. Contact with rotating mower blade(s) and thrown debris will cause injury or
death.
• Do not remove the grass deflector from the machine, because the grass deflector
routes material down toward the turf. If the grass deflector is ever damaged,
replace it immediately.
• Never put your hands or feet under the mower.
• Never try to clear the discharge area or mower blades unless the power takeoff
(PTO) is off. Rotate the key to the O

Adjusting the Height of Cut

Use the height-of-cut lever to the right of the operating position to adjust the height of cut
from 38 to 114 mm (1-1/2 to 4-1/2 inches) in 13 mm (1/2 inch) increments.
Note:
3445-793A
The transport position is the highest height-of-cut position.
DANGER
position and remove the key.
FF
G441492
Page 4–14 Operation: During Operation