Beko VRW 80318 VB User Manual page 13

3 Installation
3.3 Roller brush cover mounting
Removal:
Press the unlock button on
the top cover of the floor
brush with your finger and
pull up to remove the top
cover of the floor brush.
3.4 Roller brush cover removal and mounting
Removal:
Unlock the roller brush by
pressing the left button
and pulling the roller brush
upwards.
C
When using the brush on the carpet, turning off the water spray function is recom-
mended.
3-in-1 Cordless Vacuum Cleaner / User Manual
Installation:
Fit the top cover tabs into the
grooves in front of the roller
brush and press the cover
firmly. Installation is com-
plete when a "click" is heard.
Installation:
Place the roller brush on the
right wheel axle and press
the roller brush down. The
roller brush unlock button
is equipped with a push
button for positioning, and
assembly is complete when
a "click" is heard.
13 / EN