Related Manuals for Beko VRT 7524
Summary of Contents for Beko VRT 7524
- Page 1 Cordless Stick Vacuum Cleaner User Manual VRT 7524 VRT 7524 P 01M-8839103200-3817-04 01M-8839093200-3817-04...
- Page 2 Please read this manual first! Dear Customer, Thank you for selecting a Beko product. We hope that you get the best results from your appliance which has been manufactured with high quality and state-of-the- art technology. For this reason, please read this user manual and all other provided documents carefully before using the appliance and keep it as a reference for future use.
-
Page 3: Table Of Contents
CONTENTS 1 Important safety and environmental instructions 1.1 General safety ........4 1.2 Compliance with the WEEE Directive and disposal of the waste product . -
Page 4: Important Safety And Environmental Instructions
Important safety and environmental instructions This section contains safety • The mains supply on which you instructions that will help protect will use the appliance must be from risk of personal injury or secured with a minimum 13 A fuse. material damage. -
Page 5: Compliance With The Weee Directive And Disposal Of The Waste Product
Important safety and environmental instructions • Do not attempt to dismantle the 1.3 Compliance with RoHS Directive appliance. • Use the original parts or The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain parts recommended by the harmful and prohibited materials specified in the manufacturer only. -
Page 6: Plug Wiring
Important safety and environmental instructions 1.6 Plug Wiring The moulded plug on this appliance incorporates a 13 A fuse. Should the fuse need to be replaced an ASTA approved BS1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the event of losing the fuse cover, the plug must not to be used until a replacement fuse cover has been fitted. -
Page 7: Your Cordless Stick Vacuum Cleaner
Your cordless stick vacuum cleaner 2.1 Overview 2.2 Technical data 1. Switch button 2. Dust cup release button Rated input power : 200W 3. Metal tube release button 4. Electrical ground brush Adapter input 5. Machine body 100-240V~ 50/60Hz 130mA 6. -
Page 8: Part Disassembling
Part disassembling 3.1 Installation of battery pack 3.5 Connection of floor brush and handle component Align the sliding slot of battery pack with the guide rail on the main body, and insert the battery Insert the floor brush into the handle component, pack into the main body until “click”... -
Page 9: Disassembling Of Parts
Part disassembling 3.8 Disassembling of parts This battery pack is only applicable for this machine and forbidden 3.8.1 Disassembling of metal for other purposes. It can only be charged by its own adapted tube charging dock. This battery pack shall not be disassembled or in Press the metal tube release button, tube, and touch with liquid to avoid damage or remove the metal tube. -
Page 10: Operation Mode Of Accessories
Part disassembling 3.10 Charging of vacuum Due to the circular inching switch cleaner mode adopted, when the whole machine is operated in standard When vacuum cleaner power is insufficient, please mode, press the switch button charge the vacuum cleaner timely. When the twice to turn it off;... -
Page 11: Cleaning And Replacement Of Component
Cleaning and Replacement of Component The filters can be purchased from authorized 3. Hold the dust cup by one hand, grab its upper distributors of vacuum cleaner. cover component by another hand to rotate in anticlockwise direction to pull out the upper It is recommended to promptly clean the dust cover component. -
Page 12: Cleaning Of Rolling Brush
Cleaning and Replacement of Component 5. Take out the filter for cleaning or replacement. 6. The repaired or cleaned filter shall be used after being dried by ventilation. 7. After pull out the cyclone cone component in the direction as shown in the figure (replace it if necessary), assemble it in the reverse order of disassembly. -
Page 13: Troubleshooting
Troubleshooting Motor cannot rotate. Dead battery. >>> Charge the vacuum cleaner. Reduced suction. The dust cup is full of dust. >>>Pour out the dust in the cup. Air-out filter of dust cup is filled with dust. >>> Clean or replace the air-out filter of dust cup. The air inlet pipe of electrical floor brush is blocked or the rolling brush is stuck. -
Page 14: Guarantee
Product Guarantee 12 months breakdown and repair guarantee Guarantor: Beko plc, 1 Greenhill Crescent, Watford, Hertfordshire. WD18 8UF The guarantee does not in any way diminish your statutory or legal rights. Your appliance has the benefit of our manufacturer’s guarantee which covers the product for 12 months from the date of original purchase. - Page 16 www.beko.co.uk...