Graphic Equalizer - Onkyo R-100 Instruction Manual

Example:
Checking the timer setting by which the unit starts at 20:00 and
stops at 20:30.
ONEYVO fava TUNER AMPLIFIER 8-100
AUTO!
uate
ADIUST PROGRAM STAND-BY MONO.
Cort
CD Press the POWER ON.
@) Press PROGRAM two times in quick succession. _ _
""@ "CHECK" will come on, and then the time (20:00) when this
will come ON is displayed. "ON" will flash for 5 seconds.
Artistry in Sound
STEREO AUTO
® The "OFF" time (20:30) is displayed and the OFF indicator
flashes at the same time for 5 seconds.
TT
ie SB
NOTE:
| Be careful not to change the SOURCE button while recording. |
cording.
©
Simultaneous monitoring of a recording is not possible with
a 2-head tape deck or a DAT, but connection is possible.
Using a Mixing Console or Graphic Equalizer
Connect this unit's PROCESSOR OUT jack with the graphic
equalizer's INPUT jack, and this unit's PROCESSOR
IN jack with
the graphic equalizer's OUTPUT jack.
ae INPUT OUTPUT
Be
R-100 GRAPHIC EQUALIZER
If no processor or graphic equalizer is connected, use the jumper
plug provided to short the these terminals.
Equalizing Audio Source Performance
@) Select the desired listening source with the SOURCE button.
(2) Begin performance.
NOTE:
Under DIRECT conditions, the equipment connected to the
processor jacks will become useless, so always be sure DIRECT
has been canceled.