Table of Contents
Advertisement
Available languages
Available languages
a
IES
Front View
1.
Headphone Jack
Standard 1%' (3.5mm) stereo jack for listening to the audio signal from audio
CDs.
Headphone Volume Control
. Adjusts the headphone sound level.
3.
al
"
Disc Drawer
Accepts a CD-ROM disc on its tray.
Busy Indicator
The Busy Indicator lights during initialization and data-read operations.
Emergency Eject Hole
Insert a paper clip here to eject the drawer manually or when there is no
power.
Play/Skip Button
7
When an Audio CD is in the Dise Drawer, pressing this button will start
playing audio CDs from the first track. If an audio CD is playing, pressing this
button will skip to the next track.
Open/Close/Stop Button
This button is pressed to open or close the CD tray.
If an audio CD is playing, pressing this button will stop it, and pressing it
again will open the tray.
Back View
1.
2.
3
4.
?
5
Digital Audio Output Connector
This is a digital audio output or Video CD output connector.
You can connect this to a digital audio system or a Video CD Board.
Analog Audio Output Connector
The Audio Output Connector connects to a sound card.
Master/Slave/CSEL Jumper
These three jumpers are used to set the CD-ROM Drive to either a Master,
Slave, or CSEL device.
Interface Connector
This 40-pin connector is used to transfer data and control signals between the
CD-ROM Drive and your PC.
Power-in Connector
Attach a power cable from the computer to this connector.
E-6
Advertisement
Table of Contents
