Table of Contents
Advertisement
sf eel0lo)(-m@ al=1e4
Camcorder
The power is not on.
The battery pack is not
Attach the battery pack.
attached
The battery is dead
Use a charged battery pack
The AC power adaptor is not
Connect the AC power adaptor
connected to a wall outlet.
tu a wall outlet.
While being operated in
Turn STANDBY down once
CAMERA mode, the camcorder | and turn it up again.
has been in the Standby mode
for more than 5 minutes.
oe
[Thebaveryisdead.
| Useachargedbatwny pack | 6]
=
The power gues off.
The battery pack is quickly
discharged.
The ambient temperature is too
low.
The battery pack has not been
| Charge the battery pack again.
charged fully.
The battery pack iscompletely
| Use another battery pack.
dead, and cannot be recharged.
The tape is stuck to the drum.
Eject the tape.
The tape has run out
Rewind the tape or use a new
one.
The POWER switch is set tu
Set it to CAMERA.
PLAYER.
START/STOP does not
operate.
The tab on the cassette is out
Use a new tape or slide the tab.
(red).
The cassette cannot be removed | The battery is dead.
Use a charged battery pack or
from the holder.
the AC power adaptor.
No function except for cassette
| Moisture condensation has
Remove the cassette and leave
ejection works.
occurred,
the camcorder for at least an
hour.
The tape does not move when a | The POWER switch is set to
Set it ty PLAYER.
17
CAMERA or OFF.
Operation
pressed.
tape transport button is
The tape has run out.
Rewind the tape or use a new
one.
The camcorder is not
malfunctioning. You may start
recording. Flashing will stop
soon.
The STEADY SHOT function
STEADY SHOT is set to OFF.
Set STEADY SHOT to ON.
does not activate. (CCD-TR82)
The date or time indicator is
You pressed DATE and TIME
flashing.
together for more than 2
seconds.
Advertisement
Table of Contents
