BenQ SL6501 User Manual page 73

Monitor ID
Heat status
Monitor
information
DP version
Set the ID number for controlling the display via the RS232C
connection.
Each display must have a unique ID number when multiple sets of
this display are connected. Monitor ID number range is between
1 to 98.
Please set Monitor ID to be "1" if MDA is controled via LAN.
Configuration 2
2
Advanced option
This function allows you to check the thermal status at any time.
• A temperature-warning message will be shown on the screen if
the temperature reaches 97°C (207°F). All key functions except
key will then be disabled.
• Once the temperature reaches 98°C(208°F), the display power
will be shut down automatically.
Shows information about your display, including model number,
serial number, operating hours and software version.
Monitor information
Model name
Serial no
Operation hours
SW Version
DisplayPort support mode.
The options are:
• DP 1.1 (Default) : DP 1.1 single stream(clone mode)
• DP 1.2 SST: DP 1.2 Single stream(clone mode)
• DP 1.2 MST: DP 1.2 Multi-Stream
The DP version must be set the same for all daisy chain displays.
OSD turn off
OSD H-position
OSD V-position
OSD transparency
Information OSD
Logo
Monitor ID
Heat status
Monitor information
DP Version
SL6501
xxxxxxxxxxxx
8H 33M
V0.302
OSD Menu 69
1