Garland TEXEL 389 QG Instruction Manual page 39

6.2.5. MOUNTING THE CUTTING DISC
3
9
6
6.2.6. HARNESS INSTALLATION
6.3. FUEL AND OIL
powder
extinguisher.
away from the machine.
1
Use unleaded gasoline 95 octane.
Do not use fuel that has been stored for longer than
4
2 months. A fuel stored for too long will cause the
starting of the machine to be more difficult and result
in unsatisfactory engine performance. If the fuel
has been in the machine's tank for longer than two
months, empty the tank and replace it with fuel in
perfect condition.
6.3.1. FILLING THE FUEL TANK
1. Choose a suitable area to perform this operation.
2. Remove the fuel tank cap and fill with fuel.
3. Tightly close the fuel tank's cap and remove all the
fuel that spilled with a dry cloth.
39/148
IMPORTANT: The fuel used for this machine
is highly flammable. If the fuel or the
machine ignites, put out the fire with a dry
Petrol and oil are extremely flammable and
explosive under certain conditions. Do not
smoke and keep flames, sparks or heat
English