Garland TEXEL 389 QG Instruction Manual page 34

English
3. WARNING SYMBOLS
Warning labels indicate required information for the
use of the machine.
Advertencia y cuidado.
Do not let people enter in the
work area. This area will be of a
diameter of 15 meters from the
point in which you are working.
Use protective non skid boots with
protective steel.
Use appropriate security gloves.
It is necessary to use eye protection at
any time.
It is necessary to use acoustic protection
at any time.
It is necessary to read this manual
carefully before using this machine.
Attention!: Do not touch the cutting blade.
Attention!, Danger!: The cutting tool
can project hard objects.
Be careful don't hit with any object when
turning
Attention!, Danger!: The cutting tool can
project hard objects.
Caution! Maximun speed of gear
XXXX min
Caution! Hot Surface.
-1 .
Sense of rotation.
Do not smoke or bring a flame to the
combustible or the machine.
Complies with EC Directives.
Guaranteed level of sound power Lwa,
Db(A).
XX
4. MACHINE SYMBOLS
In order to ensure safe operation and maintenance of
the machine are the following symbols in the machine.
Fuel tank
Oil tank
Air positions:
Open = Normal operating position.
Located in the top of the filter.
Open = Normal operating position.
Located in the top of the filter.
Position for starting the machine in cold.
Located on the of air filter cover.
Position for starting the machine in cold.
Located on the of air filter cover.
0
Positions start switch located on the right
STOP -
handle of the machine.
"O" = Off (The machine don´t work)
I
START -
"I"= On (The machine is ready to work)
34/148
Always check the crankcase oil
level before starting. Capacity: 0,1
litres. Multigrade oil 10W-40.