3B SCIENTIFIC 1009934 Instruction Manual

3B SCIENTIFIC ® PHYSICS
Basic Hall Effect Apparatus 1009934
Instruction manual
11/23 ALF/UD
1 Decoupled measurement outputs (4-mm-safety
sockets)
2 Earth socket
3 Power supply input, 12 V AC/3A
4 4-mm plugs for insertion into supplied U-shaped
holder
5 Trimmer for sample current
6 Sample fixture
The equipment conforms to safety regulations for
electrical measuring instruments and control and la-
boratory equipment as per DIN EN 61010, part 1
and is designed to conform to protection class 3. It
is intended for use in dry rooms which are suitable
for the use of electrical equipment.
 If the equipment can no longer be operated
without hazards arising, it should immediately
be withdrawn from use.
 Do not expose the equipment to high humidity,
7 Measurement outputs, 4-mm safety sockets
8 Trimmer for Hall voltage compensation
9 Trimmer for temperature
10 Decoupled measurement outputs (8-pin mini-
DIN sockets)
11 Display
12 Fixture for magnetic field sensor
13 Buttons for changing display
1. Safety instructions
extreme temperatures or severe shocks.

Before using the equipment, read the instruc-
tion manual in order to avoid damage to the
equipment or injury to users.
The board with the sample can become very hot
when in operation (170°C) so that there is a risk of
burns.
 Before removing the circuit board, allow it suf-
ficient time to cool.
1