Table of Contents
Advertisement
Power On Default
Set the input source or channel to display and. A/V settings when turn on power in AC Power On or Stand-by
status.
Input Source
Set whether it is turned on by the set input source or by the last stored input source.
• It is turned on by the Last Memory Input if the
• It is turned on by the Last Pr. If the
RF.
• The available
• If both the
Input Source
the priority.
• When the Input Source is changed the
Major, Minor) is available.
• Access to an input source item and a channel in
when Power On Default is activated.
Tune Mode
Tune the selected start channel with
virtual channel and analog channel uses physical channel.
Major
Select major part of start channel number if Input source value is TV. (in case of ATV, it means
physical channel number.)
Minor
Select minor part of start channel number if Input source value is TV.
A/V Setting
A/V Setting
If
is changed from
are applied whenever turn on power.
• Following Parameters are applied to basic.
- Picture section - PSM mode, Picture Data (Contrast, Brightness, Color, Sharpness, Tint)
- Sound section - SSM mode, Sound Data (Balance, Equalizer Data)
- AVL (Auto Volume Level) and Language, Teletext language, ARC Data.
• Except these, other parameters are applied differently according to the TV-Set.
Aspect Ratio
The aspect ratio determines the default aspect ratio that the set returns to on power up.
• The modes are as follows:
- Aspect ratio =
- Aspect ratio =
- Aspect ratio =
- Aspect ratio =
• If enabled, upon power up the television resets the aspect ratio to the specified state regardless
of how the user has previously changed the aspect ratio.
Input Source
Input Source
values should be rotated.
and the
Timer Power On
Physical
Off
to On, parameters that are set before entering installation menu
"Disable
(0)" stays at previous state, same as consumer model.
"Original
(1)"
"4:3
ratio (2)"
"16:9
ratio (3)"
Input Source
is turned off.
is turned off and the last memory Input is the
of User Menu are set, the Input source takes
TV
(TV, DTV, CATV, CADTV), Channel menu (Tune Mode,
Timer Power On
or
Virtual
method. Usually, digital channel uses
of User Menu must be disabled
9
Advertisement
Table of Contents
