Table of Contents
Advertisement
Diagnostics
Diagnostics Setup
Introduction
This diagnostic function provides current status information of the TV in XML file format using a USB device. If
the user sets a signal standard level,
that the user tuned to. It checks and records good and bad channel signals, and then provides the signal
information to a USB storage device in XML file format.
1 Overview Diagnostics
• It provides status information of the TV and information about the current input in XML file format. (There
are two kinds of information. There is information which is extracted regardless of the model, such as the
model name or boot version, and there is information which is available depending on the model, such as
the micom version, PTC version, etc.). The information created in the XML file can be checked in the TV's UI
by pressing 88888888 in the TV's General menu.
• If a SignalTrace standard level is set, it saves the average value of the channel signal with less than 30
tuning counts to the digital broadcasting channel. If the count is more than 30, it saves good and bad
signals by comparing the average signal value to the current signal strength and signalTrace standard level
(Signal Tracer
Set) value.
- Bad signal: BML (average value) → strength (current signal strength) and (BML - strength) → Signal
Tracer Set
- Good signal: BML< strength and (strength - BML) → Signal Tracer Set
• It provides the good and bad signals, average signal value, channel information, and date information etc.
in USB in XML file format. (Saved in changedSignal_report tag) Up to 127 reports for good and bad signals
are saved. If the reports number more than 127, they are written again beginning from 1.
Signal Tracer Set
checks the signal strength status of the digital channel
17
Advertisement
Table of Contents
