Power Management; Dtv Programme Update; Power On Default; Input Source - LG T340C Z Series Installation Manual

Power Management

The Power Management feature will turn off the television receiver if no input control command is received from either the Local or IR Key within
a selected hours.
• Activity on either of these inputs shall restart the Power Management timer and prevent interruption of TV viewing.
• This entry can be set to a value which is corresponding to the desired hours (1 to 7).
• Default value is Off (disabled).
• TV should off and on after apply this setting.

DTV Programme Update

It is a mode to set whether to update DTV Programme information automatically or not.
• When DTV Programme Update is set to Auto, the function to update TV's Programme map according to DTV Programme's stream information
• DTV Programme Update is set to Manual, the function to keep TV's Programme map even though DTV Programme's information is changed.

Power On Default

Set the input source or Programme to display and. A/V settings when turn on power in AC Power On or Stand-by status.

Input Source

Set whether it is turned on by the set input source or by the last stored input source.
• It is turned on by the Last Memory Input if the Input Source is turned off.
• It is turned on by the Last Pr. If the Input Source is turned off and the last memory Input is the RF.
• The available Input Source values should be rotated.
• If both the Input Source and the Timer Power On of User Menu are set, the Input source takes the priority.
• When the Input Source is changed to the TV, Programmes menu is available.
• When the Input Source is changed to the ATV, the Programme No. is set to 0. (If the Programme map structure does not support this, it
depends on model's Programme handling.)
• Access to an input source item and a Programme in Timer Power On of User Menu must be disabled when Power On Default is activated.

Programme

Select start Programme number if Input source's value is TV. (in case of ATV, it means physical Programme number.)

A/V Setting

If A/V Setting is changed from Off to On, parameters that are set before entering installation menu are applied whenever turn on power.
• Following Parameters are applied to basic.
- Picture section - PSM mode, Picture Data (Contrast, Brightness, Color, Sharpness, Tint)
- Sound section - SSM mode, Sound Data (Balance, Equalizer Data)
- AVL (Auto Volume Level) and Language, Teletext language, ARC Data.
• Except these, other parameters are applied differently according to the TV-Set.
9