FUNAI SYLVANIA DV220SL8 Owner's Manual page 14

Dvd/cd player with video cassette recorder
Table of Contents

Advertisement

You can set the unit to start recording
whenever
it detects
a video
signal from the external
tuner.
Preparing for the Satellite Link Timer Recording:
Preparation on the tuner
Preparation on this unit
• Satellite
link accepts
only the connection
from L1 (rear) with
the
L1
external
tuner.
(The connection
from L2 cannot
read any signals
from the cable/satellite
box.)
• The external tuner should be equipped
with some kind of timer
function.
Using timer function
of the tuner, set it to output
audio/video
signals when it comes to the time you want to start recording, and
stop output
audio/video
signals when it comes to the time you want to
finish recording.
Refer to the tuner's manual on how to set the timer.
• Make sure to turn offthe
tuner
when you finish
setting.
external
tuner
RCA audio/video
cables
Press [SPEED]
to select the desired
tape
speed.
SPEED
0
5
Set the desired
start
minutes.
If you wish to go back to the left, press [_1].
SATELLITE UNK
01 6d_M
2
In stop
mode,
press [SETUP].
6
Press [I_] to set satellite
link standby
mode.
SETUP
Q
@
3
4
Select "SATELLITE
LINK".
Then
press [1_] to go to next
step.
Set the desired
start
hour.
SATELUTE
UNK
Then
press [1_] to go to next
step.
00 AM
• The hour can be selected
from
1-12 with AM or PM.
• When the external tuner signal is stopped,
recording
will be stopped.
SATELUTE UNK
OI, 3O PM
[ON]
• [] indicator
on this unit
lights
up and the unit goes to the DVD
mode.
If you do not use DVD function,
turn
off the unit.
• Satellite
unit must
be turned
on for VCR satellite
link to start.
If cable/satellite
box is not set to output
signals,
satellite
link will
remain
in standby
mode.
To cancel
the satellite
link function
in standby
mode:
Press [T-SET]
on the remote
control
or [STOP/EJECT
__] on this
unit.
To cancel
the satellite
link function
while
the satellite
link
recording
is in progress:
Press [STOP/EJECT
• __] on this unit.
Note:
• If you have not set the clock, "CLOCK SET" menu
will appear
at step 2. Refer to "Clock
Setting"
on page 8.
• You cannot
set the ending
time
for the satellite
link timer
recording
on this unit.
• Recording
picture
will be distorted
if the copy
protection
signal
is being
detected
during
satellite
link timer
recording.
• When
a regular
timer
recording
and the satellite
link timer
recording
are overlapped,
those
recordin,
; are recorded
as illustrated
below.
eg)
[n case of the satellite
lin k timer recording
is overlapped
on the existing
timer iecolding
timer
recording
satellite
link
.....
ding
result
eg) In case of the timer recording is programmed in the middle
of the satellite link timel recording
timer recording
satellite link
....._J_ng
res01t I
I
eg) [n caseof the timer recording isoverlapped on the existing
satellite link timel iecolding
timer recording
satellite [ink
Warning: Unauthorized recordings of copyrighted cassette tapes
may be an infringement
of copyright laws.
1)
Insert a pre-recorded
cassette
tape into another
external
device for playback.
2)
Insert a recordable
cassette
tape into this unit for recording.
3)
Press [SPEED] on the remote
control
to select recording
speed (SP or SLP).
4)
Press [INPUT
SELECT] on the remote
control
to select L1 or
L2. Choose
L1 if device
is connected
to rear input jacks, or L2
if connected
to the front.
Refer to "Front
& Rear Terminals"
on
page 9 for more details.
5)
Press [REC/OTR]
on the unit.
6)
Press "PLAY" button
on the external
device.
7)
To stop recording,
press [STOP/EJECT
• A]
on this unit,
then stop playback
of the external
device.
output jacks of
external
device
rear
of the
unit
or
CAaudio/video
.....
cab,es
,,,
You can use
a video
disc player,
cable/satellite
box or other
audio/video
component
with audio/video
output
jacks.
Note:
/• For best
results
during
dubbing
use buttons
on this unit whenever
/
possible.
The remote
control
might
affect
another
device's
operation.
/• Always
use video-quality
shielded
cables
with
RCA-type
connectors.
/
Standard
audio
cables
are not recommended.
L•
L 2 input jacks
are on the front
of this unit.
-14-
EN

Advertisement

Table of Contents
loading

Table of Contents