Radio Menu - Soundstream VR-7HB Owner's Manual

2din 7" monitor
Table of Contents

Advertisement

.3. Touch to turn on or off of steering wheel control (when the steering wheel control wires - grey
& green as well as the ground wire connected)
.
4. Touch to activate SW STUDY MENU for steering wheel control learning & setting.
Steps for learning & setting
:
~
touch any control key "5" on screen
~
press & hold the respective control of the steering wheel of the car
~
the unit starts learning and once completed, indicator appears on screen
~
follow the above steps to set for all other controls
~
when completed, press "7" to confirm the setting
~
press
"6"
to cancel the setting
5.
These show items available for setting
.
6. Touch to cancel the
setting.
7. When study & setting completed, touch to confirm the setting.
VERSION OF UNIT
VERSION OF UNIT
1.
Touch to shift screen to MAIN
MENU.
2.
Touch to shift to previous menu or operation
mode.
3.
These show the software version of unit.
Note:
The VERSION OF UNIT is used to show the details of unit.
This is not available for
setting.
ON SCREEN - RADIO OPERATION
At MAIN
MENU,
touch to shift screen to RADIO MENU for radio operation
.
RADIO MENU
RADIO MENU
1.
Touch to shift to MAIN MENU for selection of various operation and
setup.
2.
Touch to shift to Bluetooth operation
.
(Note:
Bluetooth icon will be highlighted when the unit linked up with the mobile phone)
3.
Touch to activate audio & visual setting for various audio & visual setup (refer to ON-
SCREEN - AUDIO & VISUAL SETTING for
details).
4.
Touch to turn off the
screen.
When the screen turned off, touch any portion of the screen to
turn on the
screen.
5.
Touch to fine tune radio frequency upward or
downward.
[ 15]

Advertisement

Table of Contents
loading

Table of Contents