Table of Contents
Advertisement
SYSTEM SETUP
SYSTEM SETUP MENU
SYSTEM SETUP MENU
'l
lt2
]
1
3
1. Touch to shift screen to MAIN
MENU.
2. Touch to shift to previous menu or operation
mode.
3. Hold & slide to show the hidden setting
modes.
4.
Touch to activate AREA INTERFACE to select the country or area located (for the radio
frequency that suits the country or area that located).
5.
Touch to activate LANGUAGE INTERFACE to select the desired system language on
screen.
6. Touch to activate PASSWORD INTERFACE to
input
password for opening scene logo
setting.
Remarks:
This setting is for ex-factory setting and not available for user setup
7. Touch to turn on or off of front camera input (when front camera and the pink/black wire
connected)
:
~
when the front camera
input
is turn on and the car is shifted from backward mode to
forward mode, front camera input will be display for 1 O seconds
~
the default setting after first installation is off and at this
moment,
no front camera input will
be display when the car is shifted from backward mode to forward mode
8.
Touch to turn on or off of rear camera input (when rear camera and the pink wire connected)
.
9. Touch to turn on or off of headlamp detection of the car (when the orange wire connected with
the on/off of car headlamp).
ON mode:
When the headlamp of the car turned on, brightness of screen will shift to the
default setting by user. User can also adjust the brightness of screen at this
mode (refer to ILLUMINATION BACKLIGHT SETUP for details)
OFF mode:
When the headlamp of the car turned on, brightness of screen will not be
affected
Remark: Backlight illumination of the unit will only be activated when the headlamp detection
is turn on and the orange wire connected
11. Touch to turn on or off of sub-woofer output.
12.
Touch to turn on or off of beep sound when touching on screen for control.
[ 9
l
Advertisement
Table of Contents
