Table of Contents
Advertisement
search brake lever @.
Note :
lever.
Clean the reel disk shaft well,
and apply oil to it.
Take-up reel disk i
IW
f
Take-up reel disk
catch
Take-up reel
retainer
Video search
brake lever
Apply a thin tip driver to the arrow position in
releasing for easier setting of the take-up reel disk.
Figure 1-23.
Height checking and adjustment
Note:
Setting
Reverse
guide
Cassette
lock
release shaft
Jake-up reel disk
Figure 1-24.
Positioning
VC-SOET
Reverse quide
Master plane
Figure 1-25.
1. For height adjustment, press the reel disk with a
finger, and turn
it right and
left with
a
screwdriver (See Figure 1-26 (a)).
Check that the reel disk is lower than part A but
higher than part B. If the height is not correct,
adjust the height adjusting screw (See Figure 1-
26 (b)).
Note :
Whenever
replacing the reel disk, perform the
height checking and adjustment.
2.
Slide it right and left.
and check contact with .
the reel disk.
~Gpomesp-
ls
!
Reel disk height
~tanse kewee
ma
é
10+£0.2mm
| Reel disk |
r Mechanism chassis
Reel disk
(b)
Figure 1-26.
15
Advertisement
Table of Contents
