VALBERG 1D NF 359 E X742C Instructions For Use Manual page 21

B
Illustration of the buttons
All buttons are valid only in unlocking status.
Short beep after per touching of buttons.
FRIDGE:Temperature control of the appliance
Available only for user defined mode. Follow methods below to deselect super mode and
vacation mode, and then user defined mode is selected.
Thermostat setting for ambient T°C : NORMAL ≈ +24°C (± 4°C)
Thermostat setting for ambient T°C : COLD ≈ +16°C (± 4°C)
Thermostat setting for ambient T°C : HOT ≈ +32°C (± 4°C)
SUPER:Select and deselect super mode
Press "SUPER" button to select super mode. After 5 seconds flashing of super mode icon,
super mode is selected.
When super mode is selected, super mode icon will light on, and display window will show
2°C.
In super mode, touching "FRIDGE" button, super mode icon will flash 3 times, but fridge
temperature can not be changed.
To exit Super mode,
- Press "SUPER" button to deselect Super mode,
- Or after 3 hours of super mode without any operation, the refrigerator will automatically
stop it and enter to previous setting.
WARNING:
In super mode, noise of the appliance may be slightly higher
than normal running.
ALARM/VACATION:Clear door opening alarm, select and deselect vacation mode
Short touching «ALARM/VACATION» button to clear door opening alarm.
Touching «ALARM/VACATION» button for 3 seconds to select vacation mode. After 5 seconds
flashing of vacation mode icon, vacation mode is selected.
Using the appliance
14 EN
4°C
4°C
3°C