Advertisement
Sleep Mode
Sleep mode is activated automatically 10
seconds after the last user interaction. In
sleep mode the LCD will dim, and power
usage will drop. The first user interaction
(rotation, knob press, or knob hold for 4
seconds) will wake up the device and brighten
the display.
Auto Accept
If the user was changing any setting (HVAC
mode, fan mode, set point, or temperature
units) and the knob was not pressed to accept
the current selection, the thermostat will
auto accept the current selection after 7
seconds and apply any changes.
PO Box 4020 • Wichita, KS 67204 • 574.247.9235 • www.AIRXCEL.com
Email Support: www.RVPSupport@airxcel.com • Email Sales: RVPSales@airxcel.com
Coleman is a registered trademark of The Coleman Company, Inc. used under license. Mach is a registered trademark.
AIRXCEL, INC. – RV Products Division
Manual Reboot
The thermostat can be manually rebooted by
pressing and holding the knob for 12 seconds.
When the knob is held for 4 seconds, the
thermostat will go to the units selection
screen, after another 4 seconds, the
thermostat will begin a count down. Once the
countdown reaches 0 and the display turns
off, the device will wait for the knob to be
released. Upon the release of the knob, the
device reboots.
Set Temperature Range
Temperature
Mode
Cooling (set)
Heating (set)
If the current temperature is below 33° F (0°
C), the display will show "LO" and if the
temperature is above 99° F (37° C), the
display will show "HI".
Range
°F
33° F to 99°
1° C to 37°
33° F to 99°
1° C to 37°
F
F
°C
C
C
Advertisement
