Table of Contents
Advertisement
Important Information
LCD display panels are manufactured using an extremely high level of precision technology, however
sometimes some parts of the screen may be missing picture elements or have luminous spots. This is
not a sign of a malfunction.
Cleaning the screen and the cabinet...
After turning off the power, clean the screen and the cabinet with a soft, dry cloth. We recommend that
you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage.
Dispasal...
The cold cathode fluorescent lamp in the LCD panel contains a small amount of mercury, when the set
reaches the end of its useful life please dispose of it in accordance with Local Government Regulations
or at a recycling centre.
Connection of Mains Cable
Always use the mains cable supplied. First of all insert the mains cable into the input panel of the CTV,
and only there after in to mains supply socket.
ELECTRICAL CONNECTIONS
For your own safety read the following instructions carefully before attempting to connect this unit to
the mains supply.
IMPORTANT
appliance may not correspond with the coloured
The wires in the mains ieaci are
markings identifying the terminals in your plug, proceed
coloured in accordartce with the
as follows;
following code;
The wire which is coloured blue or black must be
Blue - Neutral
connected to die terminal which is marked with the letter
. Brown - Live
N or coloured Black.
As the colours in the mains lead of this
The wire which is coloured brown or red must b©
connected to the terminal which is marked with the letter
L or coloured Red.
No connection is to be made to the Earth terminal of the
plug.
if a 13 Amp (B$1363) Plug is used, fit an ASTA
'^PWN
{Neutral)
(Live)
approved 3, 5, or 13 Amp h.ise as required.
If your product is fitted with a moulded plug which
feejuires replacement please cut off and dispose of
safely. Wren rewire as shown above.
IMPORTANT
appliance may not correspond with the coloured
The wires in the mains lead are coloured
markings identifying the terminals in your plug,
in accordance with the fol!o\wng code:
proceed as follows;
Blue - Neutral
The wire which is coloured green and yellow must
Brown -• Live
be connected to the terminal which is marked with
Yellow/Green - Earth
the letter E, or by the earUi symbol, or coloured
As the colours in the mains lead of this
green or green and yeilow.
The wire which is coloured blue or black must be
GREEN
connected to the terminal which is marked with the
letter N or coloured Black.
YELLOW
The wire which is coloured brown or red must be
connected to the terminal which is marked with the
letter L or coloured Red.
/
If a 13 Amp (BS1363) Plug is used, fit an ASTA
iir- /
BROWN
approved 3, 5, or 13 Amp fuse as required.
blue
(Neutral)
(Live)
If your product is fitted with a moulded plug which
requires replacement please cut off and dispose of
safely, then rev/ire as stiown above.
Caution:
-Under no circumstances should the discarded plug be inserted into a mains socket. To
prevent shock hazard carefully dispose of the discarded plug into your dustbin, do not leave the plug
lying around where children might see it.
-
4
-
Advertisement
Table of Contents
