Download Print this page

PULSEEIGHT neo 1-2 Quick Start Manual

QUICK START GUIDE

neo 1-2 HDMI Splitter (P8-HDMI-SP2)

This installation guide helps you to install and use your Pulse-Eight neo 1-2 HDMI

Splitter for the ﬁrst time.

Go to help.pulse-eight.com for additional information on this product including

important technical information not provided in this document and warranty terms

& conditions.

SCAN FOR HELP

CHECK WHAT'S INSIDE THE BOX

• 1 x neo:1-2 HDMI Splitter

• Please read the instructions before attempting to install or operate this equipment.

• Visit the

help.pulse-eight.com

conﬁguration tools.

HDMI Output - Connect the appropriate high speed HDMI cable to each output. These cables should then be

directly connected to each Sink device. (TV/Ampliﬁer etc.)

5V DC is used with the supplied power adapter to connect the power.

HDMI Input: Connect the appropriate high speed HDMI cable to the input. This cable should then be

connected to the Source device. (Blu-Ray player etc.)

• 1 x Power Supply Adapter

to download the latest product manual, additional documentation, and

• 1 x Quick Start Guide

Table of Contents

Need help?

Do you have a question about the neo 1-2 and is the answer not in the manual?

Page 1 QUICK START GUIDE neo 1-2 HDMI Splitter (P8-HDMI-SP2) This installation guide helps you to install and use your Pulse-Eight neo 1-2 HDMI Splitter for the ﬁrst time. Go to help.pulse-eight.com for additional information on this product including important technical information not provided in this document and warranty terms &...
Page 2 INSTALLATION Connect the HDMI cable from your video source (e.g. Blu-Ray player) to the HDMI input of the neo HDMI splitter. Connect sink devices directly (i.e. TV) to the HDMI Outputs via high speed HDMI cables. Insert the supplied power adapter to the neo HDMI splitter and plug it into the AC mains. Ensure the sink devices are powered on before powering on the splitter.

P8-hdmi-sp2