Advertisement
Address
Default
0F4B
01
0F4C
F7
0F4D
00
0F4E
0F
29. EEPROM LAYOUT (HANDSET)
29.1. Scope
The purpose of this section is to describe "layout of the EEPROM (IC3) KX-A145 Handset".
The EEPROM contains hardware, software, and user specific parameters. Some parameters are
set during production of the handset e.g. crystal oscillator adjustment at 0000..01, some are set
by the user when configuring the handset e.g. ringer volume at 349, and some during normal
use of the phone e.g. redial memory at 020D..028E.
Name
Config1
Config2
UserData.SmsPabxSuport x
Config2
Type
Country
Setting
x
D
D7
D
D
FF
D
81
Description
BsUiTask configuration (MSB)
Bits 1=enable 0=disable
0: AmPmClockSettingEnabled,
1: ClipDetectionSettingEnabled,
2: AkzMenuEnabled, disabled
3: HakzMenuEnabled, disabled
4: RussianClipSttingEnabled, disabled
5: SmscSendNumberSettingEnabled,
disabled
6: SMSPabxSupportSettingEnabled,
disabled
7: Unused
BsUiTask configuration (LSB)
Bits 1=enable 0=disable
0: FlashTime1Enabled, enabled
1: FlashTime2Enabled, enabled
2: FlashTime3Enabled, enabled
3: KeyClicksEnable, disabled
4: ARSCarrierMenuEnabled, enabled
5: ARSIntDeletionMenuEnabled,
6: ARSMultipleCarrierMenuEnabled,
enabled
7: ARSMultipleAreaCodeMenuEnabled,
enabled
SMS PABX Support On/Off
BsUiTask configuration 2
Bits 1=enable 0=disable
0: RingerModeMenuEnabled, enabled
1: CallRestrictionMenuEnabled,
2: CancelHandsetMenuEnabled,
3: BaseToneMenusEnabled, enabled
4-7: Unused
Advertisement
