Advertisement
6.13.2. Storing the Area Code(s)
Store the area code(s) for which the chosen carrier (network) service charge rates are lower
than the original carrier (network) service. Up to 25 area codes can be stored.
- To exit the operation, press
- *1: The factory preset is 0000.
- *2 If you need more area code storing, repeat the steps from 6.
6.13.3. Relate the Area Code(s) to the Carrier Code(s)
After storing carrier code(s) and area code(s), you must relate the stored area code(s) to your
chosen lower costing carrier code. It is only necessary to relate area codes to carrier codes if
more than one carrier code has been stored. If only one carrier code has been stored, any area
codes you store (up to 25) will automatically be dialled with that carrier code.
- To exit the operation, press
- *1: The factory preset is 0000.
- *2 If you need more relating area codes to carrier codes, repeat the
steps from 5.
6.13.4. Automatic Route Selection On/Off
any time.
any time.
18
Advertisement
