Manual Tv Channel Search; Satellite Receiver - Philips 25PV808 Operating Instructions Manual

Manual TV channel search

In certain cases the 'Automatic TV channel search' may not be
able to find all of the TV channels (e.g. coded TV channels). In
that case, use this manual method to set the channels.
a
Press the button on the remote control. The main
MENU
menu will appear.
b
Select the line '
Installation
button and confirm with the
A
c
Select the line '
Manual store
button and confirm with the
A
MANUAL STORE
Channel/Frequency
TV system
Search
Fine tuning
Name edit
Programme number
Decoder
NICAM
ã Exit:
« press MENU
d
In the line '
Channel/Frequency
display for:
' ': frequency
FREQU.
' ': channel
C CH
' ': special channel
S CH
e
If you know the frequency or channel of the desired TV
channel, you can enter the data in line '
the digit buttons .
0-9
D If you don't know the frequency or channel of the TV
channel of your choice, press the
the channel search.
f
In the line '
Programme number
programme number you want e.g.: '
button.
C
g
If you want to change the TV channel name, press the
button in line '
C
Name edit
E Select the character you want to change with the
the button. Change the character with the
C
button. Select the next character in the same way.
A
E To confirm the information, press the
6
' with the or
B
button.
C
' with the or
B
button.
C
FREQU.
PAL-BG
123
(,,,,=,,,,$
xxx
01
OFF
ON
', select the
' with
Search
button to start
C
' select the
', using the or
D
01
'.
or
D
or the
B
button.
OK
h
In the line ' ', select funtion '
NICAM
the or button.
C D
i
If you want to change the automatic tv channel setting,
select the line '
Fine tuning
With the or button you can vary the automatic tv
D C
channel setting. Important: This re-tuning is only
necessary and useful in special cases, e.g.: when there
are stripes on the picture with cable-TV systems.
j
Press the button to store the TV channel.
OK
D If you want to search for further TV channels, start
e
again at step .
k
To end, press the
MENU
D If you have programmed a recording (TIMER), a
wake-up timer or a sleep-timer, you can't select the
function '
Manual store

Satellite receiver

You can receive channels from the satellite receiver via the
scart socket .
EXT. 1
To do this, select the channel number '
button. You will have to select the channels to be received by
the satellite receiver on the receiver itself.
' or ' ' with
ON OFF
'.
button.
'.
' with the
qP r
E1