Table of Contents
Advertisement
Satellite receiver
If you are connecting a satellite receiver, please
read the section 'Using the satellite receiver'.
Decoder
If you are connecting a decoder, you must
install it as described in the next section.
Decoder allocation
Some TV channels transmit encoded TV signals
which can only be viewed with a purchased or
rented decoder. You can connect such a decoder
to this TV-Video Combi. The following function
will automatically activate the connected decoder
for the desired TV channel.
1.
1.
Use
or
P +
P -
0..9
number which you would like to allocate the
decoder to.
2.
2.
Press
. The main menu will appear.
MENU
3.
3.
Use
or
PLAY B-K
SET UP'. Then press
4.
4.
Use
or
PLAY B-K
AL TUNING'. Then press
5.
5.
Use
or
PLAY B-K
'DECODER'.
MANUAL TUNING
PROG.
CHANNEL
DECODER
SKIP
SELECT K L CHOOSE B
END=EXIT
6.
6.
Use
to select 'ON' (Decoder
FWD
1- B
switched on).
7.
7.
To end, press
STATUS/EXIT
The decoder has now been allocated to this pro-
gramme number.
How can I switch off the decoder?
Use
to select 'OFF' (Decoder
FWD 1- B
switched off).
Manual TV channel search
In some cases it can occur that all TV channels
are not found and saved during the first installa-
tion. In this case, the missing or coded TV chan-
nels must be searched for and stored manually.
1.
1.
Press
. The main menu will appear.
MENU
2.
2.
Use
or
PLAY B-K
SET UP'. Then press
to select the programme
to select 'TUNER
STOP C-L
.
FWD 1- B
to select 'MANU-
STOP C-L
.
FWD 1- B
to select
STOP C-L
P55
055
[OFF]
[OFF]
.
to select 'TUNER
STOP C-L
.
FWD 1- B
3.
3.
Use
or
PLAY B-K
TUNING'. Then press
MANUAL TUNING
PROG.
CHANNEL
DECODER
SKIP
SELECT K L CHOOSE B
END=EXIT
4.
4.
Select 'PROG.' with
Then press
FWD 1- B
5.
5.
With
or
PLAY B-K
the desired programme number that you want
to use for the TV channel, e.g. 'P01'. Then
press
FWD 1- B
6.
6.
Select 'CHANNEL' with
, and confirm with
desired channel with
If you set ' SKIP ' on for a channel, this channel
will be ignored when going through the channels
P +
with
.
P–
I don't know the channels for my TV stations
In this case, press
'CHANNEL' to start the automatic channel search.
A changing channel number will appear on the TV
screen. Continue the automatic search until you
have found the desired TV channel.
7.
7.
Save the TV channel with
8.
8.
To search for other TV channels, start again at step 4.
9.
9.
To end, press
Using the satellite receiver
You can receive channels from the satellite
receiver via the scart socket EXT1/ AV1.
To do this, select the channel number 'AV1' by
pressing 0,0,1, with the keys
control.You will have to select the channel you
want to receive on the satellite receiver itself.
Automatic Tuning
During installation, all available TV channels are
searched for and saved. If the channel assign-
ments of your cable or satellite TV provider
change or if you are re-installing the TV-Video
Combi, e.g. after moving house, you can start
this procedure again. This will replace all the TV
channels already saved with the new ones.
6
to select 'MANUAL
STOP C-L
.
FWD 1- B
P55
055
[OFF]
[OFF]
or
PLAY B-K
STOP C-L
.
, select
or
STOP C-L
0..9
.
or
PLAY B-K
. Then enter the
FWD
1- B
0..9
.
or
PLAY B-K
STOP C-L
FWD
1- B
STATUS/EXIT
.
on the remote
0..9
.
STOP C-L
in
.
EN
Advertisement
Table of Contents
