Automatic Recording From A Satellite Receiver (Sat Recording) - Philips 25PV808 Operating Instructions Manual

Automatic recording from a satellite
receiver (SAT RECORDING)
You can use this function if you own a satellite receiver that
can control other machines via a scart cable and a
programming function.
a
Press on the remote control.
TIMER s
b
Select the line '
TIMER PROGRAMMING
or button and confirm with
B A
TIMER PROGRAMMING
DATE PROG.START END
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
-- -- --:-- --:-- -
ã Exit:
« press TIMER
c
Press .
C
TIMER PROGRAMMING
DATE PROG.START END
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15 xxx 15:36 15:50 -
ã Exit:
« press TIMER
d
Select the entry field '
PROG.
button. Select '
Record prepared
button.
A
e
Confirm with the button.
OK
Your TV-VIDEO Combi is now prepared for recording. The
start and end of the recording is controlled via the scart
cable.
f
To end, press the
TIMER s
g
Place a cassette in the machine.
24
' with the
.
C
VPS
LP PDC REP.
- -----
Start:
press è
VPS
LP PDC REP.
* ONCE
Start:
press è
' with the or
D C
' with the B
button.
E If you have not connected the satellite receiver yet, use a
scart cable to connect scart socket
TV-VIDEO Combi to the corresponding scart socket on
the satellite receiver.
h
Programme the satellite receiver with the required
information (programme number on the SAT receiver,
start time, end time).
D The information on how to programme your satellite
receiver can be found in the instruction manual for
your satellite receiver.
Activating a recording from the SAT
receiver with OTSR
(OTSR = One Touch Sat Recording)
In the previous paragraph we described how to prepare the
TV-VIDEO Combi for recording from the SAT receiver by
means of the menu (step
you to record a SAT programme fast and easy with just one
button press.
a
Press the
Sr/q
timer light on your TV-VIDEO Combi starts blinking. It will
blink three times and will then stay alight.
Your TV-VIDEO Combi is now prepared for recording. The
start and end of the recording is controlled via the scart
cable.
D Each time you programme a recording on the
satellite receiver, you must prepare your TV-VIDEO
Combi for recording. Each time you prepare your
TV-VIDEO Combi for a satellite recording a
TIMER-block will be reserved and the TIMER light at
the front will blink.
D If the TIMER light does not blink, you have not set
the clock or all TIMER-blocks have been used up.
Please read the paragraph 'Setting the time and
date' or 'How to clear a programmed recording
or
(TIMER)'.
D If you want to cancel the programmed SAT
recording, follow the procedure described in the
paragraph 'How to clear a TIMER'.
on the
EXT. 1
a f
through ). OTSR will allow
buttons at the same time until the