Panasonic Lumix S-S50 Service Training Manual page 28

(4) For more accurate checking, hang the hand glass installed from the upper part of
the center of the Checking Chart to the string down, and adjust it to come to the
chart center.
And If the lens of oneself reflecting in the mirror is displayed in the center of the
LCD monitor, placing is correctly.
*We recommend to set the Master body(DC-S1R) setting to Manual focus assist
display mode.
Hand
mirror
Make Mater body(DC-S1R) the brightest aperture.
(5)
* In case of S-S50, set the F value to F1.8.
Focus on the center of the Checking Chart with AF enabled.
(6)
Start the software by PC.
(7)
Shoot the Checking Chart in real time and confirm the chart picture is shown on the software window.*
(8)
* Note: Adjust the luminance by fine-tuning the shutter speed as the luminance display becomes 150±15.
* In detail, please see the software operation manual.
Luminance display
※Specification：150±15
26