Table of Contents
Advertisement
Instructions, M-611, Software Rev. R.
PACKAGE CONTENTS
The M-611 Sound and Light Control ships as a complete assembled unit. In addition, (3) three
of each P546-12 and P546-10 Button Overlays are included in a poly bag taped to the outside of
the M-611 enclosure. The complete M-611 and button overlays are packaged together within
anti-static wrap.
ELECTRICAL POWER REQUIREMENTS
Voltage Required:
Max. Current:
Output Relay Capacities:
Weight:
Dimensions:
Enclosure Cable Fittings:
Operating Temperature Range: 0-70 deg. C., 32-158 deg. F.
Installation Environment:
Ingress Protection:
Safe Vicinity to Compass:
ADDITIONAL DRAWINGS INCLUDED IN THIS MANUAL FOR REFERENCE:
Outline Dimensions:
Parts List:
Wiring Diagrams:
INSTALLATION
WARNING: HIGH VOLTAGE MAY BE PRESENT INSIDE ENCLOSURES. BE SURE TO SHUT OFF
POWER, TAG OUT, AND VERIFY NO VOLTAGE IS PRESENT BEFORE INSTALLING OR
ATTEMPTING TO SERVICE THIS UNIT. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN
SERIOUS INJURY OR DEATH.
INITIAL SETUP:
The M-611 is a programmable unit requiring initial setup in order to properly operate the
devices intended, and to customize the function of the unit dependent on various connection
requirements to other controllers that are to operate in conjunction with the M-611 such as
external General Alarm Systems.
100-240 Volts A.C. 1 Ph., 50 or 60 Hz
8-30 Volts D.C. (optional emergency backup voltage)
.5 Amps
110-240 Volt A.C., 50/60 Hz, 1 Ph.,
OR 8-30 Volts D.C. (as indicated in wiring diagrams)
2 Amps Max. each output relay
2.62 lbs./1.18 kg
7.75" x 3.63" x 5.25" (197 x 92 x 133mm)
(4) Four, 10-14 mm cable
Protected from weather, code B, IEC60945.
IP65
TBD
3-6540
3-6542
3-6705 (General) or as Specified by Contract
4
Rev. 12/19/2023
Advertisement
Table of Contents
